Overview
The Daystar KT09120BK is a 2.5-inch suspension lift with front strut spacers, rear lift blocks, a rear U-bolt kit and a hardware kit. The manufacturer fitment list covers the 2005-2017 Toyota Tacoma, across many trims of that model.
The rear lift uses lift blocks and U-bolts, and shock absorbers are not part of the kit. Most stock components stay in use with this kit, which keeps the setup simple.
Key features
- 2.5-inch lift height
- Front strut spacers
- Rear lift blocks
- Rear U-bolt kit
- Hardware kit included
Checking the rear setup
Lift blocks move the rear axle away from the frame, which changes the pinion angle and lengthens the brake lines. Driveline vibration is the most common sign that the angle has moved too far, so pay attention to vibration at highway speeds and under acceleration. U-bolts carry the axle load at the lift point, so check them for tightness and for any movement of the block after the first drive.
The front strut spacers raise the nose of the truck, and balancing the front against the rear keeps handling predictable. Stock shocks may need replacing when the ride height changes, so measure their length before the lift is finished. A stretched brake line can fail under load, so inspect it whenever the axle has moved.
- Check driveline angle after installation
- Re-tighten U-bolt nuts after initial drives
- Measure stock shocks against new ride height
Specifications
| Brand | Daystar |
|---|---|
| Part number | KT09120BK |
| UPC | 814423010863 |
| Lift height | 2.5 inches |
| Front | Strut spacers |
| Rear | Lift blocks, U-bolt kit |
| Shocks | Not included |
Vehicle fitment
The manufacturer fitment list covers the 2005-2017 Toyota Tacoma, in the models shown on the list.
It fits 2005-2017 Toyota Tacoma models across many trims. Verify your year, model and trim before buying.
Installation notes
Lift blocks change the rear axle position, so check the driveline angles and the brake line length after the rear is lifted.
What’s included
Front strut spacers, rear lift blocks, a rear U-bolt kit and a hardware kit.
Not included: shock absorbers.









