Overview
The Moog right-hand connecting tie rod DS1430 is a steering part sold individually. The connecting tie rod links the two steering knuckles across the front of the vehicle, so it sets how the wheels move together, and its wear shows up as wander or toe change. It fits 2004 to 2006 Jeep Wrangler LJ, including Unlimited and Unlimited Rubicon, and 1997 to 2006 Wrangler TJ models.
MOOG says its Problem Solver line is designed for like new steering, easy installation and longer life. The company describes its powdered metal gusher bearing as routing grease to the stud, a patented cover plate that allows tighter tolerances, and a full ball metal stud with 360 degrees of smooth rotation. Patent pending Sunoloy coated metal bearings are also described.
Key features
- Right-hand connecting tie rod position.
- Gusher bearing design routes grease to the stud.
- Patented cover plate design allows tighter tolerances.
- Full ball metal stud rotates 360 degrees smoothly.
- Sold individually
Toe and steering geometry
The connecting tie rod is the link that holds the two front wheels in step with each other, so small amounts of wear can change how the vehicle tracks. Watch for a wandering feel on the highway, a steering wheel that is off center, or tire wear that appears as feathering across the tread. Because the part is simple, the usual problem is a worn end or sleeve rather than the rod body itself.
On a Wrangler, this joint works hard off road when the axles articulate and the steering swings through its range. Inspect the rod ends for play, check the boot if one is fitted, and look for bent metal after any trail impact. Replacing the connecting tie rod is often paired with new outer ends and a fresh alignment, so the steering geometry stays matched. Keep the threads clean and set the sleeve length before final tightening.
- Wander on the highway
- Off-center steering wheel
- Feathered tread wear
Specifications
| Brand | Moog |
|---|---|
| Part number | DS1430 |
| UPC | 80066277196 |
| Product type | Connecting tie rod |
| Position | Right-hand connecting tie rod |
| Listed applications | 2004 to 2006 Jeep Wrangler LJ; 1997 to 2006 Jeep Wrangler TJ |
| Sold as | Individually |
Vehicle fitment
It fits the 2004 to 2006 Jeep Wrangler LJ and the 1997 to 2006 Wrangler TJ. Trim names, including Unlimited and Rubicon, are not used for fit. Confirm your year, chassis and the right-hand connecting position before ordering. Other Wrangler generations are not covered by this part.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A connecting tie rod changes toe between the two wheels, so an alignment is needed after replacement. Check the adjuster sleeve and jam nuts are tightened to specification before the wheel alignment.
What’s included
One right-hand connecting tie rod, sold individually.
Not included: Jam nuts, clamps and sleeve hardware are not included.









