Select your vehicle
-13%

Tie Rod End

Moog

$26.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 12:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Direct fit for 1999–2005 Ford F-250 Super Duty and F-350 Super Duty
  • Moog ES3427T, left hand inner or right hand side
  • Full ball metal stud with powdered metal gusher bearing
  • Sold individually

Description

Overview

The Moog ES3427T is a tie rod end for the 1999–2005 Ford F-250 Super Duty and 1999–2005 Ford F-350 Super Duty, sold individually. It is made for the left hand inner or right hand side position, so match the side to the steering linkage you are replacing. A tie rod end joins the steering linkage to the wheel assembly, so worn ends show up as looseness or wander in the steering.

The part uses the Problem Solver design, engineered for like-new steering, easier installation and longer service life. The design features below describe the bearing, cover plate and stud.

Key features

  • A powdered metal gusher bearing channels grease through the bearing to the stud, which Moog says reduces friction and adds strength.
  • A patented cover plate design gives tighter tolerances than traditional cover plates, for a more durable part.
  • A full ball metal stud allows 360 degrees of smooth, consistent rotation for more responsive steering.
  • Patent-pending Sunoloy coated metal bearings give a smooth stud swing.
  • Designed for ease of installation and longer life.

Steering linkage wear signs

Tie rod ends on a heavy-duty Super Duty take a steady beating from road shock, trailer hitches and rough surfaces. Looseness at the wheel, a clunk over bumps and a steering wheel that wanders on the highway are the usual signs. Lift the front safely and push the tire in and out at the top and bottom to feel for play at the stud, then look at the boot for splits.

A tie rod end is only one part of a steering system. The drag link, pitman arm and idler arm carry the same loads, and a loose neighbor can wear a new end quickly. Replacing one worn joint is often paired with a check of the rest of the linkage and a fresh alignment. Keep the stud clean and seated, and confirm the castle nut is secure before the vehicle is driven under load.

  • Clunk over bumps
  • Play felt at the stud
  • Torn or greasy boot

Specifications

Brand Moog
Part number ES3427T
UPC 80066278698
Position Left hand inner; right hand side
Stud Full ball metal
Bearing Powdered metal gusher, Sunoloy coated (patent pending)
Sold as Individually

Vehicle fitment

It is a direct fit for the 1999–2005 Ford F-250 Super Duty and 1999–2005 Ford F-350 Super Duty.

This part’s fit is limited to the 1999–2005 Super Duty models listed above. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One tie rod end, sold individually.

Not included: the opposite-side tie rod end, if your vehicle needs a matched pair.

SKU: MOGES3427T Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 12.00 × 4.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Ford F-250 Super Duty1999–2005Harley-Davidson Edition, King Ranch, Lariat, XL, XLT
Ford F-350 Super Duty1999–2005Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Moog ES3427T fit a 1999–2005 Ford F-250 Super Duty?

Yes. It is a direct fit for the 1999–2005 Ford F-250 Super Duty. Check that your year and model fall inside that range before ordering, since the fit stops at 2005.

Is the Moog ES3427T sold as a pair?

No. It is sold individually, and Moog places it in the left hand inner or right hand side position. A matched pair would need a second part for the other side of the steering linkage.

What does the Problem Solver design change compared with a standard tie rod end?

The design uses a powdered metal gusher bearing that feeds grease through to the stud, a patented cover plate with tighter tolerances, and a full ball metal stud that rotates through 360 degrees. Those features are built into the part.

Does the ES3427T need an alignment after installation?

Yes. Changing a tie rod end alters toe, so have the front alignment checked afterward. Tire wear and steering centering are good checks after the work, and an uneven setting can wear tires quickly.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon