Overview
The Moog right-hand outer tie rod end DS1463 is a steering part sold individually. The outer tie rod end connects the steering link to the right knuckle, which lets the right wheel pivot as the steering turns. It fits 2003 to 2008 Dodge Ram 1500 models in the right-hand outer position.
Moog’s Problem Solver line is designed for like new steering, straightforward installation and longer life. Its powdered metal gusher bearing routes grease to the stud, a patented cover plate allows tighter tolerances, and a full ball metal stud rotates through 360 degrees. Patent pending Sunoloy coated metal bearings give a smooth stud swing.
Key features
- Right-hand outer position.
- Gusher bearing that routes grease to the stud
- Patented cover plate
- Full ball metal stud with 360 degrees of rotation
- Sold individually
Choosing a replacement outer end
Outer tie rod ends wear at the stud and socket, and the first sign is usually looseness or wander in the steering, especially on rough pavement. Uneven tire wear along the outer edges can also point to a joint that has loosened and let toe drift out of specification. Inspect the rubber boot for splits and check for play by rocking the wheel with the vehicle safely supported.
Outer ends are often replaced together with the inner tie rod and any worn idler or pitman components, since the whole linkage shares the load. Replacing one side only is common, but compare the old and new ends side by side so the length and thread match before installation. A matched alignment afterward keeps the new part from wearing the tire faster than the old one did.
- Clicking or popping when turning
- Wandering or pulling on the highway
- Feathered or cupped tire edges
Specifications
| Brand | Moog |
|---|---|
| Part number | DS1463 |
| UPC | 80066323077 |
| Product type | Outer tie rod end |
| Position | Right-hand outer |
| Listed application | 2003 to 2008 Dodge Ram 1500, including Laramie, SLT, SRT-10, ST, SXT, Sport and TRX4 entries |
| Sold as | Individually |
Vehicle fitment
It fits 2003 to 2008 Dodge Ram 1500 models, with trims including Laramie, SLT, SRT-10, ST, SXT, Sport and TRX4. Trim is not used to determine fit. Confirm the model year and right-hand outer position on your truck before ordering, since left and right links are not interchangeable.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An outer tie rod end changes toe, so a front alignment should be checked after replacement. Tighten the castle nut to specification and confirm the steering centers properly after the work.
What’s included
One right-hand outer tie rod end, sold individually.
Not included: Nuts, cotter pins and boots are not included with this end.









