Overview
The Rubicon Express RM12010 is a tube adapter with a 3/4-inch-16 right-hand thread. It is designed to be welded into a 1-inch inside diameter tube, so it is a fabrication part rather than a bolt-on component.
It is a universal fit part, so no vehicle is named. The jam nut is not included with the adapter.
Key features
- Designed to be welded into a 1-inch ID tube
- 3/4-inch-16 thread size
- Right-hand thread direction
- Minimum tube inside diameter of 1 inch
- Jam nut not included
Thread checks before welding
A right-hand thread is the standard direction for most fasteners, but the mating rod or component decides which adapter fits. Before welding, confirm the thread direction against the part it connects to, since a mismatch will not seat properly. A fabricator can test-fit the threaded part to check engagement before the weld is made.
Tube adapters carry load at the joint, so the weld, tube wall, and threads all matter. Clean the weld zone, keep the adapter square, and avoid heat distortion that could close the thread. After installation, check for cracks around the weld and confirm the jam nut will lock the adapter once fitted.
- Confirm thread direction before welding
- Verify the tube is 1-inch inside diameter
- Fit the jam nut after the weld cools
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RM12010 |
| UPC | 614901445251 |
| Thread size | 3/4 inch-16 |
| Thread direction | Right hand |
| Minimum tube inside diameter | 1 inch |
| Jam nut | Not included |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named because this tube adapter is universal fit. Its use depends on the tube it is welded into and the part it threads to.
Confirm the tube diameter and thread against your build before welding.
Installation notes
Welding is needed to install this adapter into the tube. Have a qualified fabricator do the weld and check the thread before the jam nut is fitted.






