Overview
The Energy Suspension Control Arm Bushing Set in black, part number 3.3194G, is a half set of polyurethane bushings for rear control arms. It fits the Cadillac Escalade, Chevrolet Avalanche, Suburban and Tahoe, GMC Yukon and Yukon XL, and Hummer H2 in the model years and trims covered.
A half set suits a vehicle where an aftermarket control arm with polyurethane bushings already sits at the front upper or rear lower location. The set fits the remaining stock control arms, so those arms also get polyurethane bushings.
Energy Suspension says polyurethane bushings give quicker steering response and steadier control. The company also says they help keep caster and camber in place and reduce wheel hop. These are the company’s stated benefits, not results from independent testing.
The set is for the rear position. Confirm which rear arm locations it covers against your vehicle before ordering.
Key features
- Half set for stock control arms
- Polyurethane bushings
- Rear position
- Black finish
- Fits Escalade, Avalanche, Suburban, Tahoe, Yukon, Yukon XL and H2
Polyurethane bushing trade-offs
Polyurethane bushings are firmer than rubber, so the control arms transmit more road feel and noise into the cabin. On a heavy full-size truck or SUV, that firmness helps keep the arms positioned under load, but a worn arm can feel rougher on broken pavement. Lubricating the sleeves during assembly helps them seat and move without squeaking.
Control arm bushings guide the wheel’s movement, so wear shows up as wander, uneven tire wear, or a clunk over bumps. Inspect the arms and bushings when the vehicle is raised, looking for cracks, play and rust at the mounting bolts. Mixing new polyurethane with old rubber arms can change how the suspension feels, so inspect the whole rear axle setup.
- Check mounting bolts for torque after the first drives
- Look for cracked sleeves or split bushings
- Replace arms in matched sets for even handling
- Inspect frame mounts for rust before installation
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 3.3194G |
| Position | Rear |
| Type | Half set, polyurethane |
| Color | Black |
| Use | Stock arms beside an aftermarket arm with polyurethane bushings |
| Fit | Direct fit |
Vehicle fitment
It fits 2002 to 2006 Cadillac Escalade and Escalade EXT (Base), 2007 Chevrolet Avalanche, 2002 to 2006 Chevrolet Avalanche 1500, 2000 to 2007 Chevrolet Suburban 1500 and Tahoe, 2007 Chevrolet Suburban 2500, 2000 to 2007 GMC Yukon and Yukon XL 1500, 2007 GMC Yukon XL 2500, and 2003 to 2007 Hummer H2 (Base), with the trims covered.
Silverado and Sierra trucks are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check which arm position the aftermarket part already covers before fitting the half set to the stock arms. Confirm the procedure for your vehicle before starting the work.
What’s included
The black rear polyurethane bushing half set.









