Overview
The TeraFlex FlexArm Mount, part 3992790, is a raw steel passenger side front upper FlexArm mount for Jeep Wrangler TJ and LJ front axles. It is laser cut from 3/16 inch steel and formed to position the mount for correct suspension geometry. The short text lists 97-06 Wrangler TJ/LJ as the application.
The mount is designed for Dana 44 or Dana 60 axles with a 3 inch diameter axle tube. It comes in bare steel for welding, paint or powder coating. The kit includes one upper FlexArm mount, and welding is required for installation.
Key features
- Laser cut from 3/16 inch steel
- Bare steel, ready for paint or powder coating
- Designed for Dana 44 or Dana 60 axles with a 3 inch axle tube
- Includes one upper FlexArm mount
Welding and finishing
A bare steel mount is a finished part only after it is welded in and coated, so plan the process before you start. Clean the weld area to bare metal, fit the mount in its position, and tack it before full welding so the suspension geometry can be checked. Heat from welding can warp thin steel, so work in short passes and let the part cool between them.
After welding, paint or powder coat the mount to protect it from moisture and road salt. Inspect the welds once the vehicle is back on the ground, looking for cracks, and check the bushing or joint that bolts to the mount for wear. A mount that flexes or shows cracking under load should be checked before the vehicle is driven hard.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 3992790 |
| UPC | 843885002819 |
| Position | Passenger side, front, upper |
| Material | 3/16 inch laser cut steel |
| Finish | Bare steel |
| Axle compatibility | Dana 44 or Dana 60 with 3 inch axle tube |
Vehicle fitment
The manufacturer list covers 1997–2001 Jeep Cherokee (XJ) in several trims, 2004–2006 Jeep Wrangler LJ (Unlimited and Unlimited Rubicon), and 1997–2006 Jeep Wrangler TJ in several trims.
Wrangler JK and JL models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required. Confirm the axle tube is 3 inch diameter before welding, and plan on paint or powder coating afterward, since the steel is bare.
What’s included
One upper FlexArm mount.
Not included: Other mounts and hardware are not included.




