Overview
The Mountain Off Road Enterprises lower control arm bracket, part 98700-1, is a 3/16 inch plate bracket made to fit 3-1/4 inch diameter axles. It is laser cut and CNC formed and sold as a pair.
It is offered for builders who want to make their own axle design.
Key features
- Fits axles with a 3-1/4 inch diameter
- 3/16 inch thick plate
- Laser cut and CNC formed
- It is the same bracket used in the Ford 8.8 install kit.
- Sold as a pair
Building your own axle setup
Building a custom axle setup means balancing bracket placement, arm length and pinion angle. A bracket sized for a given tube only solves part of the job, because the arm geometry decides how the axle moves under load. Sketch the layout before cutting, and mark where each arm attaches so the brackets land where the suspension expects them.
Plate thickness and cutting quality also affect the result. Laser cut edges are clean, which helps fit-up, but the weld joint still needs proper preparation. Use a square and a straightedge to set both mounts on the same plane, tack them, and check that the axle rotates freely before running full welds. Recheck after the first drive, since new brackets can settle as bushings seat.
- Sketch arm layout before cutting
- Measure axle tube before ordering
- Check pinion angle after tacking
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | 98700-1 |
| UPC | 700007050421 |
| Plate thickness | 3/16 inch |
| Axle tube diameter | 3-1/4 inch |
| Construction | Laser cut and CNC formed |
| Quantity | Pair |
| Fitment | Universal fit |
Vehicle fitment
This bracket is universal fit and is not tied to a particular year, make, model or trim. It is sized for 3-1/4 inch diameter axles, so measure your axle tube before ordering.
Confirm your vehicle’s year, model and trim before ordering. A bracket sized for your axle tube still needs to suit your own control arm layout.
Installation notes
This is a component for builders making their own axle design. Installation is left to a qualified fabricator.
What’s included
The set is sold as a pair, so two brackets. Not included: the axle itself, since the bracket is made to fit an existing axle tube.





