Overview
The TeraFlex Pro LCG Rear Upper FlexArm Bracket, part number 97881, is a rear upper long flexarm driver bracket for the TJ Wrangler. It fits all TJ Wrangler models, including the Rubicon and Unlimited.
The bracket is CNC laser cut and precision bent for accurate fitment. It is a weld-in part, so it is set in place and welded rather than bolted, which makes this a fabrication job for the rear upper flexarm position.
Key features
- CNC laser cut body
- Precision bent for accurate fitment
- Rear upper long flexarm driver position
- Must be welded for proper installation
- Covers all TJ Wrangler models, including Rubicon and Unlimited
Weld-in brackets and flexarms
Weld-in brackets are set in place and tacked before final welding, so the position of the flexarm mount determines how the axle articulates. A dry fit with the arm, bushings and frame mounts assembled gives the most reliable result, and it reveals clearance problems before the weld is laid down. Rear upper flexarms affect pinion angle and axle control, so the fit check is worth the time.
After welding, inspect the weld beads for cracks and make sure the flexarm moves freely through its range. Worn bushings or a bent arm can change the load on the bracket, so those parts should be checked at the same time. Keeping the welded area coated protects it from rust, which can weaken the joint over time and make future repairs harder.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 97881 |
| UPC | 70000439520 |
| Vehicle application | Jeep Wrangler TJ, all models including Rubicon and Unlimited |
| Position | Rear upper long flexarm driver |
| Construction | CNC laser cut, precision bent |
| Installation | Must be welded |
Vehicle fitment
It fits all TJ Wrangler models, including Rubicon and Unlimited. The TJ generation is 1997 to 2006, so the vehicle entry covers those model years. Rear upper flexarm brackets are position-specific, so match the arm position on your vehicle before welding.
It does not cover the YJ, LJ, JK or JL Wrangler generations. Verify the match for your vehicle’s year, model and trim before buying.
Installation notes
This bracket must be welded for proper installation, so use a qualified welder and dry-fit the bracket before final welding. Disconnect the battery before welding near the vehicle’s electronics.
What’s included
The bracket itself.
Not included: The flexarm and the axle and frame mounts it attaches to are separate parts.



