Overview
The Daystar KF09052BK is a black suspension combo kit for the Ford F-250 and F-350 Super Duty from 2005 to 2018. It lifts the front 2.5 inches with high density progressive polyurethane coil spring spacers and adds a 2 inch rear lift with blocks, and it includes front and rear Scorpion shock absorbers.
High density polyurethane spacers raise the vehicle without sacrificing ride quality or load-carrying capacity. They make room for 20 to 22 inch wheels while increasing ground clearance.
Key features
- High density progressive polyurethane front coil spring spacers
- 2.5 inch front lift
- 2 inch rear lift blocks
- U-bolts included
- Front and rear Scorpion shock absorbers included
- No metal-on-metal contact.
Balancing the front and rear
A combo kit lifts the front and rear by different amounts, so the truck can end up unevenly positioned if only one side is changed. Front spacers and rear blocks work together to set the stance. Measure the height at each corner before and after installation to confirm the new position.
Super Duty trucks often carry heavy loads, so the rear should be checked under load after the install. Check tire wear, steering feel and any change in braking. The rear U-bolts also loosen over time, so inspect them after the first several hundred miles of driving.
- Measure ride height at all four corners
- Check the rear U-bolts for tightness
- Inspect tire wear for uneven patterns
- Recheck the stance after loading the truck
Specifications
| Brand | Daystar |
|---|---|
| Part number | KF09052BK |
| UPC | 618089001544 |
| Color | Black |
| Front lift | 2.5 inches |
| Rear lift | 2 inches, blocks |
| Front spacer material | High density progressive polyurethane |
| Shocks | Front and rear Scorpion shock absorbers |
| Included hardware | U-bolts |
Vehicle fitment
The kit fits the Ford F-250 and F-350 Super Duty from 2005 to 2018 across their trim levels. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify the rear axle tube diameter before installing the rear U-bolts and blocks, since the U-bolts must fit the axle tube.
What’s included
Included: front coil spring spacers, rear lift blocks, U-bolts, and front and rear Scorpion shock absorbers.









