Overview
The Daystar PAPLS991 is a 2-inch premium lift system for the 2007–2011 Jeep Wrangler (JK), including 2WD and 4WD models. It raises the vehicle 2 inches by combining a body lift and leveling system, and it allows the use of up to a 34-inch diameter tire on the factory wheels.
The lift keeps the factory smooth ride and does not alter the OEM suspension geometry or the factory stability parameters. The front is raised with 3/4-inch urethane spacers, and fiberglass reinforced nylon body blocks handle the body lift. Urethane Gap Guards conceal the gaps between the body and frame.
The front lift is set by 3/4-inch urethane spacers, and the body blocks handle the body lift, so the two lift methods are kept separate in the kit.
Urethane Gap Guards conceal the gaps between the body and frame, and they are included with the kit.
Key features
- 2-inch lift without modifying existing suspension components
- Keeps the factory suspension geometry and stability settings
- Allows up to 34-inch diameter tires
- 3/4-inch high-quality front urethane spacers
- Fiberglass reinforced nylon body blocks
- Urethane Gap Guard wheel well extensions
Balancing body lift and spacers
This kit combines a front urethane spacer with body blocks at the rear, so the front and rear lift come from different parts. Keeping those two methods separate is what helps maintain the factory ride and suspension geometry. Urethane spacers can compress or crack with age, and the body blocks can settle, so both should be looked at during routine inspections.
Gap Guards conceal the gaps between the body and frame, which is useful on trails where mud and debris collect around the wheel wells. After rough use, check the guards for tears and make sure they still sit flush. Driving on a 2-inch lift also changes steering feel slightly, so take the first drives at moderate speed and recheck the hardware after the first few trips.
- Inspect urethane spacers for compression or cracks
- Check body block fasteners after rough trail use
- Recheck the Gap Guards for tears and loose mounts
Specifications
| Brand | Daystar |
|---|---|
| Part number | PAPLS991 |
| UPC | 618089009342 |
| Lift height | 2 inches |
| Maximum tire diameter | 34 inches |
| Front spacers | 3/4-inch urethane |
| Body blocks | Fiberglass reinforced nylon |
| Drivetrain | 2WD and 4WD |
| Installation time | 4 hours |
Vehicle fitment
It fits the 2007–2011 Jeep Wrangler (JK), including 2WD and 4WD models.
Wrangler model years before 2007 or after 2011 are not covered, and the Wrangler JL is not included. Compare your vehicle’s year, model and trim with the covered range before ordering.
Installation notes
The work takes about 4 hours. Some parts may not be used depending on transmission type, 2WD or 4WD, and cab or bed length, so check the parts against the vehicle before starting.
What’s included
Front urethane spacers, fiberglass reinforced nylon body blocks, high strength hardware and urethane Gap Guard wheel well extensions.









