Overview
The Pro Comp 2 Inch Lift Kit with ES3000 Shocks, part number K2054B, is a 2-inch front lift for the 1994-2002 Dodge Ram 2500 and 3500. The front lift uses metal coil spring spacers and bump stops, and Pro Comp lists no rear lift for this kit.
Steering correction is not needed. Confirm the front shock model before installing, since the kit is designated with both ES3000 and ES9000 shocks.
Key features
- 2-inch lift height
- Metal coil spring spacers at the front
- Bump stops included
- Steering correction not needed
- No rear lift component
- Maximum tire size 33×12.50 (listed)
Front lift considerations
A front lift built from coil spring spacers and bump stops keeps the factory spring and adds height at the top of the coil. The spring seat, upper mount and bump stop all take extra load at the new height, so they are worth checking for wear before the install. Fasteners that hold the spacers should be checked for tightness after the first few drives.
Because the rear stays at its factory height, the front and rear will sit differently after the lift. That can change how the truck handles loads in the bed, and it may affect headlight aim and clearance under the front bumper. Shock length matters as well, since a shock that runs close to its travel limit can wear faster.
- Inspect upper mounts and spring seats before installing spacers
- Check headlight aim after the lift
- Re-check spacer hardware after the first few drives
- Schedule an alignment after the front lift
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2054B |
| UPC | 614901122725 |
| Lift height | 2 inches |
| Front lift | Metal coil spring spacers and bump stops |
| Rear lift | None |
| Shocks | ES3000, front and rear (shock boots not included) |
| Maximum tire size | 33×12.50 |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1994-2002 Dodge Ram 2500 and the 1994-2002 Dodge Ram 3500, both in Base trim.
Ram 1500 trucks and other Ram 2500 and 3500 years are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shock boots are not included, so check whether the shocks need boots before installing. Confirm the front shock model before the install.
What’s included
The kit includes metal coil spring spacers and bump stops for the front and ES3000 shocks. The shock boots are not included.









