Overview
The Pro Comp Stage I Lift Kit, part number 55717B, is a 4-inch lift for both the front and rear of the Jeep Wrangler JK. It fits the 2007-2014 and 2018 Wrangler JK, in the standard and Unlimited body styles and across the covered trims.
The 2015, 2016 and 2017 Wrangler JK years are not on the list, so confirm the model year before you choose this kit. Newer JL Wrangler models are not covered either.
Key features
- 4-inch lift at the front and rear
- Stage I kit from Pro Comp Suspension
- It is a direct fit for the Jeep Wrangler JK.
Choosing the right setup
A lift raises the body relative to the axles, which changes driveline angles, brake hose length and the way steering components move. Taller stance also shifts the center of gravity, so braking and cornering feel different than they did at stock height. Plan for these changes as part of the install rather than treating the lift as a bolt-on swap.
Tire choice goes hand in hand with the lift. Larger tires add weight and change gearing, and they need enough clearance at full lock and full suspension travel. Wheel offset matters as well, since it affects how the tire sits in the fender. Once the lift is in, recheck clearance on the first drive and after any tire change.
- Check brake hose length after the lift
- Inspect steering components for wear
- Confirm tire clearance at full steering lock
- Re-torque fasteners after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55717B |
| UPC | 614901117547 |
| Lift height | 4 inches, front and rear |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007-2014 and 2018 Jeep Wrangler JK, including the Unlimited models.
The 2015-2017 Wrangler JK and all Wrangler JL models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4-inch lift at both ends changes driveline angles and front alignment, so have the driveline angles and alignment checked after installation.









