Overview
The Westin Snyper Rear Tube Fenders are tubular rear fenders for the Jeep Wrangler JK, supplied as a pair. They protect against flying debris and give clearance for Jeeps running large tires.
These are the rear pieces, sold as a pair. The same line also includes front fenders that are 6.4 in wide with turn signal lights.
Key features
- Protects against flying debris and gives clearance for large tires
- Textured black powder coated 14 gauge steel
- 1.5 in diameter tube with a .120 in thick wall
- Rear fenders are 4.8 in wide
- Direct fit with no cutting or drilling required
Tube fenders and tire clearance
Tube fenders are open steel rails that shield the body from mud, rocks and spray while leaving the tire visible. Because they mount to the body rather than the axle, their job is mostly protection and clearance rather than bearing load. Their width and the way they sit over the tire decide how much room a larger tread leaves before it rubs.
When fitting larger tires, check the tire width and sidewall height against the fender and the inner body. Tube fenders can keep a tire from catching on the body during flex, but wheel offset and suspension travel matter too. Tighten the mounting bolts after the first few trail runs, and look for chips in the powder coat that could start rust on the steel.
- Measure tire width and sidewall height
- Check body clearance at full suspension flex
- Inspect tube welds and mounts after rough use
- Touch up chips in the black finish
Specifications
| Brand | Westin |
|---|---|
| UPC | 707742068571 |
| Material | 14 gauge steel |
| Finish | Textured black powder coat |
| Tube diameter | 1.5 in |
| Wall thickness | .120 in |
| Rear fender width | 4.8 in |
| Quantity | A pair (two fenders) |
| Fit type | Direct fit, no cutting or drilling required |
Vehicle fitment
These fenders fit 2007 to 2017 Jeep Wrangler JK models, including the Rubicon and Unlimited, in 2-door and 4-door versions.
They fit the JK generation only. Other Wrangler generations such as the TJ, LJ and JL are not covered. Verify your year, model and trim first.
Installation notes
These tube fenders are a direct fit with no cutting or drilling, so they mount without modifying the body. Compare the rear fender width with your tires and body clearance before installation.
What’s included
A pair of rear tube fenders in textured black.
Not included: Front fenders. The front fenders, 6.4 in wide with turn signal lights, are not part of this rear pair.








