Overview
The Smittybilt TN1140-S4S is a stainless steel side bar, sold as a pair, for the 2004–2006 Toyota Tundra in its Limited and SR5 versions. The bar is cut to cab length and uses a 3-inch tube.
The step pads are non-slip polyester, held in place by five pins set into a squashed step. That retention method means no pad relies on a loose fastener, and the metal beneath is kept from being exposed to rust. The frame and body mount uses an oversize bolt attachment to stop the tube from bouncing.
It is a no-drill installation on most applications, and the mounting hardware is included with the pair. The bars are custom fit to the truck, so measure the cab length on your Tundra before ordering.
Key features
- Stainless steel finish
- Three-inch tube
- Cab-length design
- Non-slip polyester step pads
- Five-pin pad retention
- Frame and body mount with an oversize bolt attachment
- No-drill installation on most applications
- Sold as a pair with hardware included
Choosing a cab-length side bar
A side bar gives a rider a step at the door sill, which matters most on a truck with a high cab. Cab-length bars stop at the cab, so they leave the bed and rear fenders clear for gear and tailgate access. Before buying, look at the mounting points on the frame and rocker area, since those points carry the load when a rider steps on the pad.
On a trail, side bars also take hits from rocks and brush. Inspect the tube for dents or bent sections after rough runs, and check that the body and frame mounts remain tight. Pads that have worn smooth or loosened pins should be replaced before they cause a slip. If you add a lift or larger tires, recheck the bar’s clearance, because ride height changes where the bar sits relative to the tires.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | TN1140-S4S |
| Finish | Stainless steel |
| Tube diameter | 3 inches |
| Length | Cab length |
| Step pads | Non-slip polyester, secured with five pins |
| Installation | No drilling on most applications |
| Quantity | Sold as a pair |
Vehicle fitment
It fits the 2004–2006 Toyota Tundra in its Limited and SR5 versions.
The 2007–2020 Tundra and the 2000–2006 Tundra bars are separate listings and are not covered here. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes two stainless bars plus pads and hardware.










