Overview
The Smittybilt JN460-S2B is a gloss black side bar for the 1997–2006 Jeep Wrangler (TJ). It fits the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X versions, and it runs wheel to wheel.
The bar is one piece, welded for stability, with a 3-inch tube and an eight-point frame mount for strength and rigidity. The step pads are non-slip polyester, each secured by five pins in a squashed step, which the company says avoids exposed metal that could rust.
Smittybilt rates the Sure Step as a no-drill installation on most applications. All installation hardware is included, so nothing else needs to be bought for the mount.
Key features
- Gloss black powder coat
- Eight-point frame mount
- Heavy-duty one-piece welded design
- Wheel-to-wheel length
- Non-slip polyester step pads
- Five-pin pad retention in a squashed step
- Installation hardware included
Welded bars and TJ use
A one-piece welded side bar has no joints that can loosen over time, which makes it easier to live with on a Wrangler that sees daily driving and trail use. The TJ’s body sits fairly high, so a step at the right height helps riders get into the cab without grabbing the roll bar or door frame.
When choosing a bar, consider the tire size and the suspension. Larger tires or a lift change the clearance under the bar, so check that the tube still sits clear of rocks and the tire path at full articulation. Soft-top and hard-top owners should also check that the bar does not interfere with any door hardware or fender flares fitted to the vehicle.
Inspect the bar every few months. Look at the eight-point mount, the welds where the tube meets the frame bracket, and the pad pins. Rinse off mud and salt, and touch up any scratches in the gloss black coating so bare metal does not start to rust.
- Check clearance at full suspension travel
- Inspect welds at the frame bracket for cracks
- Touch up gloss black chips promptly
- Re-check the pin retention on each pad
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | JN460-S2B |
| Finish | Gloss black powder coat |
| Tube diameter | 3 inches |
| Length | Wheel to wheel |
| Mount | Eight-point frame mount, one-piece welded |
| Step pads | Non-slip polyester, secured with five pins |
Vehicle fitment
The side bar fits the 1997–2006 Jeep Wrangler (TJ) in its 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X versions.
The 1987–1995 YJ and the 2007 and later Wrangler JK are outside this fit. Before buying, make sure your year, model and trim are among the versions above.
What’s included
Installation hardware is included with the bar. No quantity is stated, so check the packing list when it arrives.

















