Overview
The Smittybilt DN230-S4S is a stainless steel Sure Step side bar for the Dodge Ram 1500 from 1995 to 2001 and the Ram 2500 and 3500 from 1995 to 2002. It fits the Ram 1500 Base, Laramie, ST, Sport and WS versions, and the heavier trucks in Base versions.
The bar is a 3-inch tube cut to cab length. Each step pad is non-slip polyester and is held by five pins set into a squashed step, so the pad does not rely on a loose fastener and the frame side has no exposed metal to rust. The frame and body mount uses an oversize bolt attachment to keep the tube from bouncing.
The mounting hardware is included, and Smittybilt rates most applications as no-drill installs. Ram 1500 owners should check the version against the list, because the trim names differ between the 1500 and the heavier trucks.
Key features
- Stainless steel finish
- Three-inch tube
- Cab-length design
- Non-slip polyester step pads
- Five-pin pad retention in a squashed step
- Frame and body mount with an oversize bolt attachment
- No-drill installation on most applications
- Mounting hardware included
How side bars are used
A side bar mainly serves as a step for getting into a higher cab, and as a handhold when climbing in or out. Those uses put a steady load on the frame near the rocker, so the bar’s attachment matters as much as its tube. Older trucks often show rust around the mount area, which is worth cleaning before a new bar goes on.
Because stainless steel does not need a coating to resist rust, it suits trucks that see salt and wet roads. Still, rinse the bar and inspect the pins that hold the step pads. Keep the frame clean around the mounts so any new cracks or loose bolts are easy to see.
- Serves as a step and a handhold
- Clean rust from the mount area first
- Inspect pad pins during routine checks
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | DN230-S4S |
| Finish | Stainless steel |
| Tube diameter | 3 inches |
| Length | Cab length |
| Step pads | Non-slip polyester, secured with five pins |
| Installation | No drilling on most applications |
Vehicle fitment
It fits the 1995–2001 Dodge Ram 1500 in its Base, Laramie, ST, Sport and WS versions, and the 1995–2002 Dodge Ram 2500 and 3500 in their Base versions.
The 2002–2008 Ram 1500 and the 2003–2008 Ram 2500 and 3500 are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Mounting hardware is included with the bar.










