Overview
The Smittybilt TN1080-S4B is a black powder coat side bar sold as a pair, for the 2000–2006 Toyota Tundra in its Limited and SR5 versions. The bar is a 3-inch tube at cab length, and the mounting hardware is included with the kit.
Each step pad is non-slip polyester, secured by five pins set into a squashed step. Smittybilt uses this method so the pad has no exposed fastener, and the steel underneath is kept free from bare metal that could rust. The frame and body mount uses an oversize bolt attachment, which the company says stops the tube from bouncing.
The bars mount without drilling on most applications. Measure the cab length on your own Tundra before ordering, because the bars are cut to a custom fit.
Key features
- Black powder coat finish
- Three-inch tube
- Cab-length design
- Non-slip polyester step pads with five pins
- Frame and body mount with an oversize bolt attachment
- No-drill installation on most applications
- Sold as a pair with mounting hardware
Pair fitment and tire clearance
Sold as a pair, these bars give both sides of the cab a step, which matters when a passenger climbs in from either side of a double-cab truck. A matched set also keeps the bars at the same height, so the truck looks even and the pads wear evenly. Older Tundras often have worn rocker panels, so look over the metal before fitting new brackets.
Tire size and suspension height affect how the tube sits. Measure the gap between tire and bar with the truck at rest and again at full steering lock. Powder coat finishes chip at the edges of the bracket, so touch up bare spots early. Re-tighten the frame bolts after the first few rough drives and inspect the pads for cracks.
- Check tire clearance at full steering lock
- Touch up chips in the powder coat before rust starts
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | TN1080-S4B |
| Finish | Black powder coat |
| Tube diameter | 3 inches |
| Length | Cab length |
| Step pads | Non-slip polyester, secured with five pins |
| Installation | No drilling on most applications |
| Quantity | Sold as a pair |
Vehicle fitment
It fits the 2000–2006 Toyota Tundra in its Limited and SR5 versions.
The 2007–2020 Tundra and the 1995–2004 Tacoma are not covered by this fit. Check your truck’s year, model and trim against the fitment before ordering.
What’s included
Both bars, the step pads and the mounting hardware come in one kit.










