Overview
The Smittybilt DN260-S4B is a gloss black Sure Step side bar cut to cab length, sold for the Dodge Ram 1500 from 2009 to 2010 and from 2011 to 2019. It fits the Laramie, SLT, ST, Sport, TRX and TRX4 versions in the 2009–2010 years, and Big Horn, Express, HFE, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, SLT, ST, Sport and Tradesman in 2011–2019.
The bar is cut to cab length from a 3-inch tube. Each step pad is non-slip polyester, held by five pins in a squashed step, so the pad sits on a retention system rather than a loose fastener, and no exposed metal is left to rust. The frame and body mount uses an oversize bolt attachment meant to prevent the tube from bouncing.
Smittybilt rates most applications as no-drill installs, and the mounting hardware is included, so the bar can be fitted without cutting into the frame on most trucks in the list.
Key features
- Gloss black finish
- Three-inch tube
- Cab-length design
- Non-slip polyester step pads
- Five-pin pad retention in a squashed step
- Frame and body mount design
- Oversize bolt attachment
- No-drill installation on most applications
Ram 1500 bed and cab notes
A cab-length bar sits beside the cab, so it helps with entry without reaching into the bed area. On a Ram 1500 the bar’s location relative to the door sill matters, so check the spacing with the door fully open before tightening the mounts.
Gloss black finishes show road grime and water spots more readily than textured coatings. Wash with mild soap, rinse thoroughly and dry with a soft cloth. A light polish and wax help keep the finish looking even between washes.
The frame and body mount has an oversize bolt attachment, which keeps the tube from bouncing. Inspect those bolts after rough roads and before towing, and make sure the pads sit flat without rocking.
- Check door clearance before final tightening
- Wash road grime off the gloss finish
- Inspect body mount bolts after rough roads
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | DN260-S4B |
| Finish | Gloss black |
| Tube diameter | 3 inches |
| Length | Cab length |
| Step pads | Non-slip polyester, secured with five pins |
| Installation | No drilling on most applications |
Vehicle fitment
It fits the 2009–2010 Dodge Ram 1500 in its Laramie, SLT, ST, Sport, TRX and TRX4 versions, and the 2011–2019 Ram 1500 in its Big Horn, Express, HFE, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, SLT, ST, Sport and Tradesman versions.
The Ram 2500 and 3500 and the 2002–2008 Ram 1500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Mounting hardware is included. Check the package contents against your installation before starting.

















