Select your vehicle

Smittybilt Wheel to Wheel Nerf Steps with Cleated Steps (Black) – C01100CC

Smittybilt

Shop GMC Sierra 2500 HD Nerf Steps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits selected 2001–2006 Chevrolet Silverado and GMC Sierra 1500 through 3500 HD trucks in specific trims
  • Gloss black wheel-to-wheel nerf steps with a 3-inch main tube
  • Four or six step drop-down design with cleated step plates
  • One-piece unit that bolts to the frame with no pre-assembled brackets

Description

Overview

The Smittybilt C01100CC is a gloss black nerf step for Chevrolet Silverado and GMC Sierra pickups, sold in a wheel-to-wheel length. It fits the 2004 and 2006 Silverado 1500 in LS and LT, the 2001 to 2003 and 2005 to 2006 Silverado 1500 HD, the 2004 Silverado 2500, and the 2001 to 2006 Silverado 2500 HD. The Sierra versions cover the same years and the SL, SLE, SLT, Base and WT trims.

The step is a 4 or 6 step drop-down design built from a 3-inch main tube, with cleated step plates for footing. The cleated plates are designed for stability, and the steps are rated for loads of up to 445 pounds. The design suits lifted trucks, where a step that sits lower and wider than the factory running board is more useful.

The unit is one piece and bolts straight to the frame, so there are no brackets to assemble first. The steps also help protect the rocker panels.

Key features

  • Gloss black finish
  • Wheel-to-wheel length
  • Four or six step drop-down design
  • Three-inch main tube
  • Cleated step plates for stability
  • Rated for loads up to 445 pounds
  • One-piece unit that bolts to the frame
  • Helps protect rocker panels

Lifted trucks and step height

A nerf step sits lower and wider than the factory running board, which makes getting into a lifted truck easier for most people. Before choosing one, measure your truck’s ride height and the distance from the bottom of the door to the step. The cleated plates help with footing on wet or muddy surfaces, but a rider still needs to keep weight over the center of the plate.

Frame bolts carry the load, so check them after the first few trips and whenever the truck has been on rough ground. Look for rust around the mounting points and touch up any chipped gloss black finish before corrosion starts. If you add a larger tire or lift, recheck the step’s clearance with the wheel and fender.

Specifications

Brand Smittybilt
Part number C01100CC
Finish Gloss black
Length Wheel to wheel
Main tube 3 inches
Step design Four or six step drop-down with cleated plates
Load rating Up to 445 pounds
Installation One-piece unit bolts to frame, no brackets to pre-assemble

Vehicle fitment

It fits the 2004 and 2006 Chevrolet Silverado 1500 in LS and LT, the 2001–2003 and 2005–2006 Silverado 1500 HD, the 2004 Silverado 2500, the 2001–2006 Silverado 2500 HD, the 2004–2006 GMC Sierra 1500 in SL, SLE and SLT, the 2001–2003 and 2005–2006 Sierra 1500 HD, the 2004 Sierra 2500, and the 2001–2006 Sierra 2500 HD.

Model years 2007 and later and the 1999–2000 trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The nerf step unit.

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002004, 2006LS, LT
Chevrolet Silverado 1500 HD2001–2003, 2005–2006Base, LS, LT
Chevrolet Silverado 25002004LS, LT
Chevrolet Silverado 2500 HD2001–2006Base, LS, LT, WT
GMC Sierra 15002004–2006SL, SLE, SLT
GMC Sierra 1500 HD2001–2003, 2005–2006SLE, SLT
GMC Sierra 25002004SLE, SLT
GMC Sierra 2500 HD2001–2006Base, SL, SLE, SLT, WT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the C01100CC fit a 2005 GMC Sierra 2500 HD SLT?

Yes. The list covers the 2001 to 2006 Sierra 2500 HD, which includes 2005, and names the SLT version. Look at the Silverado or Sierra year and version against the list first.

Does it need brackets assembled first?

No. The step is a one-piece unit that bolts to the frame, so no brackets need to be assembled beforehand.

How much weight can the step carry?

The steps are rated for loads of up to 445 pounds. The cleated plates provide firm footing, and the one-piece design bolts to the frame without brackets that need assembling first.

Should the frame mounts be checked after rough trails?

Yes. Look over the frame mounts after rough trail or washboard runs, since vibration can work fasteners loose. Tighten any fasteners that have backed off, and check the mounting points for cracks or rust.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop GMC Sierra 2500 HD Nerf Steps on Amazon