Overview
The Smittybilt Sure Step TN1220-S4S is a pair of 3 inch diameter stainless steel side bars (nerf bars) for the 2020 Toyota Tundra.
Smittybilt describes its Sure Steps as made with a high commitment to quality. The step pads are secured with 5 pins in a squashed step, with no exposed metal to rust and non-slip polyester step pads. The rugged frame and body mount design uses oversize bolt attachment, which Smittybilt says prevents tube step bounce.
Installation needs no drilling on most applications, and mounting hardware is included.
Side bars like the TN1220-S4S give a step for getting in and out of the cab and also work as side protection for the lower body.
Key features
- 3 inch diameter stainless steel side bars
- Cab length
- No drill installation on most applications
- Step pads secured with 5 pins in a squashed step
- Non-slip polyester step pads
- No exposed metal to rust
- Rugged frame and body mount design with oversize bolt attachment
- Mounting hardware included and supplied as a pair
Cab length and step height
Side bars on a full-size pickup add a step where the cab sits high off the ground. Cab-length bars run between the front and rear door areas, so they cover the part of the body that takes the most stepping and brush contact. Choose a bar height that matches how you climb in, since a bar set too high can be awkward for shorter drivers.
Stainless tubing resists rust, but the bracket welds and bolt holes still need inspection. Look for loose frame mounts, cracked pads, and any bend in the tube after a hard hit. Keeping the mounts clean and checking them each season helps the bars stay solid under repeated weight.
Side steps often go with running boards, bed rails or a bumper upgrade, and each change can affect clearance and how the bars sit on the body. If you add accessories, check the tube position against the door sills and wheel wells, and confirm the bars still clear your tires at full lock.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | TN1220-S4S (also marked S/BTN1220-S4S) |
| Product type | Side bars (nerf bars / side steps) |
| Diameter | 3 inch |
| Material | Stainless steel |
| Length | Cab length |
| Step pads | Non-slip polyester |
| Installation | No drill on most applications |
| Quantity | Supplied as a pair |
| Hardware | Mounting hardware included |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Smittybilt TN1220-S4S covers the 2020 Toyota Tundra in the 1794 Edition, Limited, Platinum and SR5 trims.
this product covers the 2020 model year only, so it does not cover earlier or later Tundra years unless they are listed above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the vehicle on jack stands rather than a jack alone while working underneath it. Re-check the fasteners after the first miles of driving, and confirm the bars keep the ground clearance you need off-road. Recheck the bolts again after rough trail use.
What’s included
- Pair of 3 inch stainless steel side bars
- Mounting hardware
- Non-slip polyester step pads










