Overview
The Smittybilt JN53-S4T is a gloss black Sure Step side bar for the 2020 Jeep Gladiator (JT). It fits the Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S versions, and the bar is cut to cab length.
Each bar is custom fit to the vehicle application rather than cut from a generic length. The brackets are steel, with 3/8 to 1/4 inch no-drill designs, and a third center bracket adds support along the length of the tube. The three-bracket arrangement is designed to limit bounce and simplify installation.
Each step pad is non-slip polyester, secured by five pins set into a squashed step, so the pad has no loose attachment and no exposed metal that could rust. The gloss black powder coat finish is covered by a 5-year limited warranty.
Key features
- Gloss black powder coat finish
- Custom fit to the 2020 Gladiator
- Steel no-drill brackets
- Third center bracket for added support
- Non-slip polyester step pads with five-pin retention
- No exposed metal to rust
- Cab-length design
- 5-year limited warranty on powder coat finish
Care and step pad upkeep
A side bar takes steady traffic from boots and mud, so the finish wears around the step pads and brackets. Check the powder coat at the edges and where the bracket clamps sit, and touch up chips before they grow. Using a mild cleaner rather than harsh solvents helps the finish last, and rinsing the bar after muddy trips keeps grit out of the joints.
Step pads secured with pins should be checked for movement or cracking, since loose pads can shift under foot. Look at the brackets after rough trails and re-tighten any fasteners that have loosened. Replace any pad that has cracked rather than trying to bond it back in place. Choosing a side bar also means considering how it sits next to the rocker panel and door opening, so measure the clearance before ordering.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | JN53-S4T |
| Finish | Gloss black |
| Length | Cab length |
| Brackets | Steel, no-drill, three including a center bracket |
| Bracket thickness | 3/8 to 1/4 inch |
| Step pads | Non-slip polyester, secured with five pins |
| Warranty | 5-year limited on powder coat finish |
Vehicle fitment
It fits the 2020 Jeep Gladiator (JT) in its Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S versions.
It fits the Gladiator for 2020 only. Wrangler JL and JK applications need a separate check. Verify your Gladiator year and trim before buying.
What’s included
A side bar with its steel no-drill brackets, third center bracket and step pads. Check the package contents against your installation before starting.













