Overview
The Smittybilt JN420-S4B is a black 3-inch Sure Step side bar for the 1984–2001 Jeep Cherokee (XJ). It fits the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport versions, and it runs wheel to wheel.
The step pads are non-slip polyester, secured by five pins in a squashed step, so no pad hangs on a loose fastener and the steel is not exposed to rust. The frame and body mount uses an oversize bolt attachment, which is intended to stop the tube from bouncing when the step is used.
The bar is installed without drilling on most applications. Mounting hardware is included, so the kit is ready to bolt on once the XJ mount points are checked.
Key features
- Three-inch black tube
- Wheel-to-wheel length
- Non-slip polyester step pads
- Five pins hold each pad in a squashed step
- Frame and body mount design
- No-drill installation on most applications
- Mounting hardware included
Step bars for an XJ
The Cherokee XJ has a relatively tall body and a short distance from the ground to the door sill, so a side bar makes a noticeable difference for passengers. Wheel-to-wheel bars also protect the rocker area from stones and mud thrown by the front and rear tires, which is useful on dirt roads and trails.
Before buying, think about the vehicle’s ride height and tire size. Larger tires or a lift raise the body and can change how comfortable the step is to reach, while a bar that sits too low can catch on obstacles. Check that the mount points under the XJ frame are clean and undamaged, because corroded frame metal can weaken a mount.
Inspect the bar after rough trail use. Look for loose bolts, bent brackets and pads that have pulled away from their pins. Rinse off mud and salt, and touch up any chips in the black finish. Keeping the mount area free of debris helps the hardware last.
- Check frame mount points for rust before installing
- Re-tighten bolts after the first few trail drives
- Note ground clearance under the bar on rough roads
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | JN420-S4B |
| Finish | Black |
| Tube diameter | 3 inches |
| Length | Wheel to wheel |
| Step pads | Non-slip polyester, secured with five pins |
| Installation | No drilling on most applications |
Vehicle fitment
The bar fits the 1984–2001 Jeep Cherokee (XJ), including Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
Grand Cherokee models (ZJ and WJ) and the Cherokee KJ are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Mounting hardware is included with the side bar. Check the number of bars in the box when it arrives.











