Select your vehicle
-13%

Smittybilt Wheel to Wheel Nerf Steps with Cleated Steps (Black) – J1246

Smittybilt

Check today’s price on Amazon

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2007–2011 two-door Jeep Wrangler JK in its 70th Anniversary, Rubicon, Sahara, Sport and X versions
  • Black powder coat wheel-to-wheel steps, sold as a pair
  • Four-step drop-down design on a 3-inch main tube
  • One-piece unit rated for up to 445 pounds

Description

Overview

The Smittybilt J1246 is a set of black powder coat nerf steps sold as a pair. It fits the two-door Jeep Wrangler JK from 2007 to 2011 in the 70th Anniversary, Rubicon, Sahara, Sport and X versions.

The steps are a four-step drop-down design built on a 3-inch main tube, with cleated step plates for footing. They are rated for loads of up to 445 pounds. One order covers both sides of the vehicle, and the steps help guard the rocker panels when getting in and out.

The unit is a one-piece design that bolts to the frame, so there are no brackets to assemble. The pair includes everything needed to mount both sides. Owners should match the listed model years and trims before ordering, since the list is limited to the 2007 to 2011 two-door JK.

Key features

  • Black powder coat finish with a textured matte look
  • Four-step drop-down design
  • Three-inch main tube
  • Cleated step plates
  • Rated for loads up to 445 pounds
  • One-piece frame-bolt design
  • Sold as a pair

Fit and mounting checks

Pairs of nerf steps make most sense when both sides of a two-door Jeep see the same use. Check that the mounting area on each side is clean, straight and free of rust before you start. Because the steps bolt through the frame, any damage near the mounts should be repaired first, not covered over with a bolt or spacer.

Textured powder coat is good at hiding light scuffs, but chips still expose bare metal over time. Touch up any chip quickly with a matching product so moisture does not start corrosion at the edges. Wash the steps after trail trips and inspect the mount bolts at the same time.

  • Clean and inspect both frame mount areas
  • Test-fit steps with your current tires before final tightening
  • Touch up chips in the coating promptly
  • Store spare hardware in a dry place

Specifications

Brand Smittybilt
Part number J1246
Finish Black powder coat with a textured matte look
Length Wheel to wheel
Main tube 3 inches
Step design Four-step drop-down with cleated plates
Load rating Up to 445 pounds
Quantity Sold as a pair

Vehicle fitment

It fits the two-door Jeep Wrangler JK built from 2007 to 2011 in its 70th Anniversary, Rubicon, Sahara, Sport and X versions. Four-door Wrangler Unlimited JK models, 2012 and later two-door JK models and JL models are not covered. Match your year, model and trim to this fit before ordering.

The four-door Wrangler Unlimited JK, the 2012 and later two-door JK, and the JL are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

A pair of nerf steps.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201170th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the J1246 fit a 2009 two-door Jeep Wrangler Rubicon?

Yes. The list covers the two-door JK from 2007 to 2011, which includes 2009, and names the Rubicon version. Check the two-door JK year and trim before you buy.

Are these steps sold as a pair?

Yes. One order includes steps for both the left and right sides. They are cleated, rated for loads of up to 445 pounds, and made for the two-door JK.

Will they fit a 2014 Wrangler?

No. Fit covers 2007 to 2011 only, so 2014 Wranglers are not included. The two-door JK from 2007 to 2011 is the only Wrangler year range this pair fits.

Can nerf steps be used with a different bumper or tire size?

Check clearance first. Steps bolt to the frame, so a bumper, fender flare or larger tire can change how the step sits and what it can clear. Test-fit the steps with the tires and bumper you plan to run before final tightening.

How should I clean a textured powder coat finish?

Rinse off mud and road salt after trail runs, then wash with mild soap and a soft brush. Avoid harsh solvents that can dull the texture. Chips should be touched up promptly, since bare metal is where rust usually begins.

Find it on Amazon

See today’s price and delivery options on Amazon, and check out with your Amazon account.

Check today’s price on Amazon