Overview
The Smittybilt TN1210-S4B is a black 3-inch Sure Step side bar for the 2007–2020 Toyota Tundra. It fits the Base, Limited, SR, SR5 and TRD Pro versions, and the kit is sold as a pair so both sides of the truck can be fitted.
The step pads are non-slip polyester and are secured by five pins set into a squashed step. This means the pad is not held by a loose fastener and the mount area is kept free of exposed metal that could rust. The frame and body mount has an oversize bolt attachment, which the company says stops the tube from bouncing when used.
The bar installs without drilling on most applications. Mounting hardware is included, so separate brackets are not needed to finish the install.
Key features
- Black powder coat finish
- Three-inch tube
- Non-slip polyester step pads
- Five pins hold each pad in a squashed step
- Frame and body mount design
- No-drill installation on most applications
- Sold as a pair with hardware included
Fit and finish tips
A pair of side bars is a practical choice for a Tundra used on both highway and trail, since the step stays at the same height on each side of the cab. Black powder coat hides small scrapes well, but it still needs attention where the tube meets the brackets. Think about how the bar will sit with your tire size and any lift, because the step height changes the angle a rider must reach.
Care is simple. Rinse mud off after trail use, check the five-pin pad retention on each step and replace any pad that rocks under weight. Look at the frame and body mount for rust or movement, and re-check the bolts after the first few rough drives. Keep a small touch-up kit on hand so chips are sealed before water can get underneath the finish.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | TN1210-S4B |
| Finish | Black powder coat |
| Tube diameter | 3 inches |
| Length | Cab length |
| Step pads | Non-slip polyester, secured with five pins |
| Installation | No drilling on most applications |
| Quantity | Sold as a pair |
Vehicle fitment
It fits the 2007–2020 Toyota Tundra in its Base, Limited, SR, SR5 and TRD Pro versions.
The 2000–2006 Tundra is not covered by this fit, and the Tacoma uses different bars. Compare your truck’s year, model and trim with the fitment before buying.
What’s included
The pair comes with step pads and all mounting hardware in one box.










