Overview
The Smittybilt C1598CC-SS is a stainless nerf step set for the heavy-duty 2015 to 2019 Chevrolet Silverado and GMC Sierra. It fits the Silverado 2500 HD and 3500 HD in High Country, LT, LTZ and WT versions, and the Sierra 2500 HD and 3500 HD in Base, Denali, SLE and SLT versions.
Each step is a 4 or 6 step drop-down design built from a 3-inch main tube, with cleated plates for footing. The unit is rated for loads of up to 445 pounds and helps protect the rocker panels when climbing in and out of a lifted heavy-duty truck.
The steps are a one-piece unit that bolts onto the frame, with no bracket assembly before fitting. There are no pre-assembled brackets to align.
Key features
- Stainless steel finish
- Wheel-to-wheel length
- Four or six step drop-down design
- Three-inch main tube
- Cleated step plates
- Rated for loads up to 445 pounds
- One-piece frame-bolt design
- Helps protect rocker panels
Lifted heavy-duty installs
Lifted heavy-duty trucks ride higher, which leaves the rocker panels and lower body more exposed to brush and rocks. A nerf step with a drop-down design can serve as a barrier and give a clearer foothold, though it does not replace careful line choice on tight trails.
Before fitting, measure tire clearance at full lock and check that the step does not interfere with mud flaps or sensor placement. Stainless surfaces resist rust, but the frame attachment and welds deserve attention after each season of hard use, especially where road salt is common.
- Check tire clearance at full lock
- Look for interference with mud flaps and sensors
- Inspect welds and frame points each season
- Keep the finish clean where road salt is used
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | C1598CC-SS |
| Finish | Stainless steel |
| Length | Wheel to wheel |
| Main tube | 3 inches |
| Step design | Four or six step drop-down with cleated plates |
| Load rating | Up to 445 pounds |
| Installation | One-piece unit bolts to frame |
Vehicle fitment
This nerf step fits the 2015 to 2019 Chevrolet Silverado 2500 HD and 3500 HD in High Country, LT, LTZ and WT versions, and the 2015 to 2019 GMC Sierra 2500 HD and 3500 HD in Base, Denali, SLE and SLT versions.
The 1500 models and the 2018–2019 heavy-duty trucks listed under the separate C1589QC-SS number are not part of this entry. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The nerf step unit.
















