Select your vehicle
-13%

Smittybilt Nerf Step Wheel-To-Wheel (Black) – F1597QC

Smittybilt

Shop Ford F-150 Nerf Steps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Wheel-to-wheel nerf step in black, part number F1597QC
  • Four-step drop-down design on a 3-inch main tube
  • Cleated step plates
  • Fits 2015 to 2019 Ford F-150 Lariat, SSV, XL and XLT

Description

Overview

The Smittybilt Nerf Step Wheel-To-Wheel in Black (part number F1597QC) is a four-step drop-down running board for lifted trucks. It runs from wheel to wheel and fits the 2015 to 2019 Ford F-150 Lariat, SSV, XL and XLT.

The step is built from a 3-inch main tube with cleated step plates for stability. Its design suits lifted truck applications, and the finish is black.

Key features

  • Four-step drop-down design
  • 3-inch main tube
  • Cleated step plates
  • Wheel-to-wheel length
  • Black finish
  • Direct fit for listed F-150 versions

Before you buy

A wheel-to-wheel step runs the full length between the front and rear wheels, so it has to clear the tires at full steering lock and sit at a usable height for your cab. Lifted trucks change those measurements, so check your current ground clearance and tire size before buying. A step carrying body weight relies on its plates and mounts, so look closely at the frame mounting points first.

It is also worth planning for related wear. Rock sliders, bump stops and mounting brackets are often inspected during installation, and a worn bracket can go unnoticed until the step starts to shift under a rider. Choose hardware suited to outdoor use, and re-check the bolts after the first few trail runs.

  • Tire size and lift height
  • Clearance at full steering lock
  • Frame mount condition before install

Specifications

Brand Smittybilt
Part number F1597QC
Tube 3-inch main tube
Length Wheel to wheel
Step design 4 step drop down
Finish Black
Fitment type Direct fit

Vehicle fitment

It fits the 2015 to 2019 Ford F-150 Lariat, SSV, XL and XLT.

Other F-150 trims, model years before 2015 and after 2019, and other trucks are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Confirm the wheel-to-wheel length and mounting points on your F-150 before installing the step.

What’s included

One wheel-to-wheel nerf step in black.

Fitment

VehicleYearsTrims
Ford F-1502015–2019Lariat, SSV, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the F1597QC step fit a 2016 Ford F-150 XLT?

Yes. It fits 2015 to 2019 Ford F-150 models in the Lariat, SSV, XL and XLT versions. Confirm your trim before ordering.

How many steps does this nerf bar have?

It has a four-step drop-down design built from a 3-inch main tube, with cleated step plates for stability. It is designed for lifted trucks.

What finish is the F1597QC step?

It is black. The same wheel-to-wheel line is also offered in gloss black and polished stainless steel under different part numbers.

How do I know if the step mounts need attention?

Check for loose bolts, cracked welds, bent brackets, and any movement when you push on the step plates. Movement at the mounts means the hardware should be tightened, and any damaged metal around the bolt holes should be repaired or replaced before further use.

Does a drop-down step reduce ground clearance?

Yes. The step sits lower than the body rocker, so it can meet rocks and ruts before the rest of the truck does. Consider the lowest point of the step against the terrain you drive most often.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-150 Nerf Steps on Amazon