Overview
The Skyjacker 172EBK is a 3 in. suspension lift kit with front coil springs and rear Add-A-Leaf springs. Check fit against your vehicle’s year, model and trim before ordering.
The kit is powder coated black to resist corrosion. A complete set needs parts beyond this kit, so review what your installation requires.
Key features
- 3 in. lift height
- Front coil springs included
- Rear Add-A-Leaf springs included
- Powder coated black to resist corrosion
- Limited Lifetime Warranty from the manufacturer
Setting up after a lift
A 3 in. lift raises the body relative to the axles and changes suspension geometry, which affects steering response, brake feel and how the tires wear. Lifts of this type are often paired with a steering check, because drag link and tie rod angles can change once the height is raised.
Rear Add-A-Leaf springs carry load differently from factory leaves, so the rear ride may feel firmer when empty. Shock absorbers are often replaced at the same time, since their length needs to match the new ride height. Check that the brake lines and hoses have enough slack once the kit is installed.
- Re-torque all U-bolts and fasteners after the first drive
- Inspect front coil springs for sag after the first month
- Check tire rub at full steering lock
- Schedule an alignment once the kit is complete
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 172EBK |
| UPC | 803696103426 |
| Lift height | 3 in. |
| Included springs | Front coil springs, rear Add-A-Leaf springs |
| Finish | Powder coated black |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the kit’s springs with your vehicle’s needs before starting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 3 in. lift changes ride height and suspension geometry, so get the alignment and driveline angles checked after installation.
What’s included
Front coil springs and rear Add-A-Leaf springs.
Not included: Parts beyond the kit are needed to finish the installation.







