Overview
The Skyjacker Softride Nitro Shock Absorber, part number N8063, is a rear twin tube shock for suspension lifts of 6 to 8 in. It fits the 1984 to 2001 Jeep Cherokee (XJ), the 1997 to 2006 Jeep Wrangler (TJ) and the 2004 to 2006 Jeep Wrangler (LJ) in its Unlimited and Unlimited Rubicon versions.
The shock is pressurized with 150 PSI of nitrogen gas and uses multi-stage velocity sensitive valving, an oversized piston head and an internal rebound bumper. The 5/8 diameter hardened double chrome rod runs on urethane bushings with compression control. It does not lift the vehicle, so the lift must come from other suspension parts.
Key features
- 150 PSI nitrogen gas pressurized
- Multi-stage velocity sensitive valving
- Twin tube construction with oversized piston head
- Internal rebound bumper
- 5/8 diameter hardened double chrome rod
- Urethane bushings and compression control
- Red polyurethane boot included
Rear shocks on a lifted axle
A rear shock on a lifted Jeep works with the springs and axle to control rebound and compression, and a gas-charged twin tube unit helps keep that control steady as the oil heats. The lift itself comes from springs or other parts, so the shock’s job is to match that new height. Choosing a shock with the right length and mounting style keeps the rear end settled over rough terrain and on the road.
Compare the rear mounting points with the old shock before you commit to a unit. Worn bushings, bent eyelets and corroded hardware are common during a swap, and they are easiest to replace while the old shock is off. Inspect the rubber boot too, since a torn boot lets grit reach the shaft and wears the seal faster on dusty trails.
- Confirm the lift height is in place before fitting
- Compare rear mounting points with the old shock
- Replace worn bushings and eyelets during the swap
- Check the boot for tears before installing
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8063 |
| UPC | 803696153605 |
| Shock series | Nitro Series |
| Position | Rear |
| Charge | 150 PSI nitrogen gas |
| Construction | Twin tube |
| Rod | 5/8 diameter, hardened, double chrome |
| Bushings | Urethane |
| Lift height | 6 to 8 in |
| Boot | Red polyurethane |
| Sold as | Individually |
Vehicle fitment
It covers the 1984 to 2001 Jeep Cherokee (XJ) with Base, Laredo, Limited, Sport and other trims, the 2004 to 2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1997 to 2006 Jeep Wrangler (TJ) with Rubicon, SE, Sahara, Sport, X and 65th Anniversary Edition trims.
The list does not include the Grand Cherokee ZJ or WJ, two-door Wrangler LJ models, or any Wrangler JK. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the N8063 is a rear shock for 6 to 8 in lifts, confirm the lift height is in place before fitting it. Compare the rear mounting points with the original shock first.
What’s included
One rear shock absorber with a red polyurethane boot.
Not included: a second rear shock, since each shock is sold individually.









