Overview
The King Shocks 25001-177A is a 2.5 Series rear shock kit with a wide range compression adjuster, sold as a pair. It fits the 2004 to 2006 Jeep Wrangler LJ, including the Unlimited and Unlimited Rubicon versions, and the 1997 to 2006 Jeep Wrangler TJ.
Compression is set with a billet knob offering 20 positive clicks, so damping changes in measured steps. The shafts are large diameter and micro-polished. The remote reservoirs connect with Aeroquip high pressure hoses and are made of 6063 aluminum alloy. The damping curve and spring rate were developed through real-world testing for these vehicles.
Key features
- Wide range compression adjuster with a billet knob
- 20 positive clicks of adjustment
- Large diameter micro-polished shafts
- Aeroquip high pressure hoses on remote reservoirs
- 6063 aluminum alloy reservoirs
- Rear position, sold as a pair
Tuning rear compression
Rear shocks control how the axle moves over bumps and how quickly the body settles after a dip or landing. Compression damping sets the resistance when the shock is pushed in, which matters most when the rear wheels hit ruts, ledges and washouts on the trail. A firmer setting can keep a loaded Jeep steadier, while a softer setting can help the axle follow uneven ground. The right choice depends on tire size, payload and how often the vehicle leaves pavement.
Before changing anything, mark the knob position so you can return to a known baseline. Make small adjustments, drive the same stretch of road, and pay attention to how the body moves over each bump. Worn bushings or a leaking shock can hide the effect of any setting, so inspect the mounts and the shock body during routine service. After a lift or a tire change, re-check the setting because the shock works at a different length.
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-177A |
| UPC | 70000544992 |
| Position | Rear |
| Shock series | Performance Series |
| Adjustment | Wide range compression adjuster with billet knob |
| Adjustment clicks | 20 positive clicks |
| Shaft | Large diameter, micro-polished |
| Hoses | Aeroquip high pressure, on remote reservoirs |
| Reservoir material | 6063 aluminum alloy |
| Sold as | Pair |
Vehicle fitment
It fits the 2004 to 2006 Jeep Wrangler LJ, including the Unlimited and Unlimited Rubicon versions, and the 1997 to 2006 Jeep Wrangler TJ in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Wrangler JK and JL models, and Wrangler years outside the ranges above, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Count the clicks on the billet knob and write down your setting before removing the shock, so you can return to the same compression after installation. Confirm that the remote reservoir hoses route cleanly before tightening the mounts. Support the rear of the vehicle securely on stands during the work.
What’s included
A pair of rear wide range compression adjuster shocks with billet knobs and remote reservoirs with Aeroquip high pressure hoses.












