Overview
The Skyjacker Softride Nitro Shock Absorber, part number N8067, is a rear twin tube shock for 4 to 5 in suspension lifts. It fits 2007 to 2018 Jeep Wrangler (JK) models in 2-door and Unlimited (4-door) versions, across Sport, Sport S, Sahara, Rubicon and X trims, plus the 70th and 75th Anniversary editions.
The shock is pressurized with 150 PSI of nitrogen gas. It uses multi-stage velocity sensitive valving, an oversized piston head and an internal rebound bumper, with a hardened double chrome rod and urethane bushings. The compression control prevents air bubbles from forming, which reduces fade. It does not lift the vehicle by itself.
Key features
- 150 PSI nitrogen gas pressurized
- Multi-stage velocity sensitive valving
- Twin tube construction with oversized piston head
- Internal rebound bumper
- Hardened double chrome rod with urethane bushings
- Compression control to reduce fade
- Red polyurethane boot included
Rear shock maintenance and wear
Rear shocks do most of their work when the suspension compresses and rebounds over washboard, ruts and rock steps. Over time the damping oil and seals wear, and a shock that has lost control can let the rear end bounce, wander or bottom out on landings. Inspect for oil seeping down the body, a dented or bent shaft, and bushings that have cracked or flattened. Because the rear springs and shocks work as a pair, a worn shock can also make a new lift feel loose.
When fitting a shock to a lifted Wrangler, check the boot for tears before installation, since grit that reaches the rod shortens seal life. Replace shocks in pairs on the same axle so both sides damp evenly. After the first few trail runs, re-check the mounting bolts and bushing tightness, because joints settle as the vehicle is used.
- Oil leaking down the shock body
- Cracked or flattened urethane bushings
- Boot tears that let grit reach the rod
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8067 |
| UPC | 80369673536 |
| Shock series | Nitro Series |
| Mounting location | Rear |
| Charge | 150 PSI nitrogen gas |
| Construction | Twin tube |
| Collapsed length | 15.69 in |
| Extended length | 26.57 in |
| Shock stroke | 14.88 in |
| Lift height | 4 to 5 in |
| Boot | Red polyurethane |
| Sold as | Each |
Vehicle fitment
It fits 2007 to 2018 Jeep Wrangler (JK) models, both 2-door and Unlimited (4-door) versions, including Rubicon, Sahara, Sport, Sport S, X and the 70th and 75th Anniversary editions. It does not fit the Wrangler TJ, LJ, YJ or JL, the Cherokee, or any JK model outside the 2007 to 2018 range. Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include the Wrangler TJ, LJ, YJ or JL, the Cherokee, or any JK model from outside the 2007 to 2018 range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4 to 5 in lift requires separate lift components, since the shock does not lift the vehicle. Confirm the rear mounting points match your JK before installing the N8067.
What’s included
One rear shock absorber with a red polyurethane boot, sold as each.
Not included: the second rear shock, because each shock in this line is a separate item.







