Overview
The Skyjacker H7022 is a rear Softride Hydro shock absorber for Toyota 4Runner models from 1990 to 2001 and Toyota Land Cruiser models from 1986 to 1989, with a listed lift range of 0 to 2 inches.
It is a twin tube hydraulic shock built with a 5/8 inch hardened double chrome rod and red polyurethane bushings. Fifteen other colors are offered, and a limited lifetime warranty applies.
Key features
- Multi-stage velocity sensitive valving
- Twin tube construction
- 5/8 in. diameter hardened double chrome rod
- Bonded iron piston and chromed piston rod
- Red polyurethane bushings and a red boot
Rear lift and older 4Runners
The rear shocks on a 4Runner carry much of the work of settling the back end over bumps, and they help keep the tires in contact with the ground on uneven trails. As the vehicle ages, the bushings harden and the fluid can thin, so the ride gets bouncier and the shock stops controlling movement as it did when new.
When choosing a replacement, match the lift range to the truck and confirm the year and trim before buying. A rear shock works best when the springs, bump stops and mounts are in good shape, so inspect those parts while the shock is off. Check the boot for tears and the eyes for cracks. Recheck the hardware after the first few drives, and keep the rod clean to protect the seal.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7022 |
| UPC | 803696135403 |
| Series | H7000 |
| Position | Rear |
| Lift range | 0 to 2 in. lift |
| Colors | 15 other colors available |
| Warranty | Limited lifetime warranty. |
| Quantity | Each |
Vehicle fitment
The manufacturer list covers 1990 to 2001 Toyota 4Runner in Base, Limited and SR5 trims, and 1986 to 1989 Toyota Land Cruiser (Base).
The list does not include 4Runner models from 2002 and later or Land Cruiser models after 1989. Cross-check your year, model and trim against the 4Runner and Land Cruiser entries first.
What’s included
One rear shock with a red boot.
Not included: a second rear shock for the other side.









