Overview
The Skyjacker H7024 is a rear Softride Hydro shock absorber from the H7000 series, built for 1990–1995 Toyota 4Runner (SR5) and 1991–1997 Toyota Land Cruiser (Base) vehicles. It is intended for a 3 – 4 in. lift and installs as a direct-fit replacement in the rear shock position.
It is a hydraulic twin tube shock. A shock absorber slows how quickly the spring compresses and rebounds, which matters more on a lifted vehicle. Multi-stage velocity sensitive valving, a hardened rod and red polyurethane bushings handle that motion. A red boot covers the rod, and the unit carries a limited lifetime warranty and is available in 15 other colors.
Key features
- Hydraulic twin tube construction
- Multi-stage velocity sensitive valving
- 5/8 in. diameter hardened rod with a double chrome finish
- Bonded iron piston with a chromed piston rod
- Red polyurethane bushings and a red boot
- Lift range of 3 – 4 in.
- Limited lifetime warranty.
Rear shock checkpoints
A rear shock works on the same axle as the spring, and on a 4Runner or Land Cruiser it is what keeps the rear end from bouncing after a rough stretch of road. Once a lift is installed, the shock works at different ride heights, so the lift height and the shock’s range should match before the install starts.
Look over the old rear shocks for oil on the body, a dented tube or a rod that feels rough when pushed by hand. Worn bushings often show up as a clunk over small bumps. When both rear shocks show the same wear, replace the pair so the rear end settles evenly.
- Match the lift height to the shock range
- Check bushings for cracks or play
- Replace rear shocks as a pair
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7024 |
| UPC | 803696135724 |
| Series | H7000 (Hydro Series) |
| Position | Rear |
| Damping | Hydraulic |
| Fitment type | Direct fit |
| Lift height | w/3 – 4 in. Lift |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in. diameter, hardened |
| Bushings | Red polyurethane |
| Boot | Red |
| Warranty | Limited lifetime (per Skyjacker) |
Vehicle fitment
It fits the 1990–1995 Toyota 4Runner in SR5 trim and the 1991–1997 Toyota Land Cruiser in Base trim.
Fit is not confirmed for the 1996 and 1997 4Runner or for 4Runner trims other than SR5, and other Land Cruiser trims are not confirmed either. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber, sold as each, with a red boot and red polyurethane bushings.









