Overview
The Skyjacker Softride Hydro Shock Absorber H7057 is a front hydraulic twin tube shock for 1980–1996 Ford Bronco and F-150 trucks. It is designed for suspension lifts in the 4 to 8 in range and belongs to the H7000 series within the Hydro line.
Hydro Series shocks use hydraulic damping with multi-stage velocity sensitive valving to control suspension movement. The H7057 pairs a bonded iron piston with a chromed piston rod, and the rod is 5/8 inch in diameter, hardened and double chrome plated. Red polyurethane bushings and a red boot come with the shock, and the product carries a limited lifetime warranty.
Key features
- Multi-stage velocity sensitive valving
- Hydraulic action for damping control
- Twin tube construction
- Bonded iron piston
- Chromed piston rod, 5/8 inch diameter, hardened double chrome
- Red polyurethane bushings and red boot
- Listed with 15 other colors available
Setting up a suspension lift
A front suspension lift changes the geometry that the shock works within, so the shock setup matters as much as the lift height. Once the lift is in, the front end often needs a wheel alignment, and the steering components should be checked for wear before a long drive on rough ground.
Front shocks handle most of the damping on a lifted truck, so their condition shows up quickly in the ride. A shock that has lost damping can let the front end bounce, pitch under braking and wear tires unevenly. Replace the front pair together so both sides respond the same way.
- Recheck wheel alignment after the lift is complete
- Inspect the upper bushing and mounting hardware
- Look for fluid on the body or around the seal
- Check that the boot is intact and seated
Specifications
| Brand | Skyjacker |
|---|---|
| Series | H7000, Hydro Series |
| Part number | H7057 |
| UPC | 803696139562 |
| Position | Front |
| Lift range | 4 to 8 in |
| Damping | Hydraulic |
| Construction | Twin tube |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in diameter, hardened double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Colors | 15 other colors available |
| Warranty | Limited lifetime |
Vehicle fitment
The manufacturer fitment list covers 1980–1996 Ford Bronco and 1980–1996 Ford F-150 models, including Custom, Eddie Bauer, XLT, XLT Lariat and Ranger trims. Each listed model and year range should be matched to your truck before ordering.
The list does not include 1997 and later F-150 trucks or Bronco models after 1996. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed lift range is 4 to 8 in, so check that your suspension lift falls within it before installation. Recheck wheel alignment after a suspension lift is installed, and support the vehicle on jack stands while working on the front suspension.
What’s included
One front shock absorber with a red boot and red polyurethane bushings.
Not included: the suspension lift kit needed to reach the 4 to 8 in lift range.









