Overview
The Skyjacker M9596 is a front M95 Performance monotube shock absorber for light trucks, Jeeps and SUVs with a 5 to 6 inch lift. Its single tube design uses a 46mm bore, and it fits 1999–2006 Chevrolet and GMC full-size 1500 trucks and SUVs, along with 2007 Classic models.
The single tube layout helps operating temperatures stay cooler under extreme conditions. High pressure nitrogen gas and a floating piston work together to give a fast-responding feel. The M95 suits owners who want a performance replacement shock on the front of a lifted vehicle.
Key features
- Monotube single tube design, which Skyjacker says helps operating temperatures stay cooler under extreme conditions
- High pressure nitrogen gas charge with a floating piston
- Internal bump stop
- Large 46mm bore
- 180 degree directional mounting
- Front position with direct fit, for vehicles with a 5 to 6 inch lift
Before you buy
A lifted truck changes the geometry of the suspension, so the shock’s length and mounting position matter as much as its damping. A replacement shock should be chosen for the lift height the truck actually runs, since a mismatch can cause the shock to bottom out or run out of travel.
Front shocks are usually replaced in pairs so both sides damp the same way. Before buying, inspect the old shock’s bushings and the bracket that holds it, because a worn bracket can make even a new shock feel loose and noisy.
- Replace front shocks in pairs for matched damping
- Inspect upper and lower bushings before installing
- Check the bracket for cracks or bent tabs
- Expect a firmer ride when lift height changes
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9596 |
| UPC | 803696211749 |
| Shock series | M95 Performance |
| Design | Monotube, gas charged |
| Gas | High pressure nitrogen |
| Bore | 46mm |
| Internal feature | Internal bump stop |
| Mounting direction | 180 degrees directional mounting |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/5 – 6 in. Lift |
| Quantity | Each |
Vehicle fitment
The M9596 fits the following vehicles:
- 1999–2006 Chevrolet Silverado 1500
- 2002–2006 Chevrolet Avalanche 1500
- 2000–2006 Chevrolet Suburban 1500
- 2000–2006 Chevrolet Tahoe
- 2007 Chevrolet Silverado 1500 Classic
- 1999–2006 GMC Sierra 1500
- 2007 GMC Sierra 1500 Classic
- 2000–2006 GMC Yukon
- 2000–2006 GMC Yukon XL 1500
Trims shown in the list include Base, LS, LT, Z71, Hybrid, WT, HT, SL, SLE, SLT, Denali and North Face, depending on the model.
Model years and generations outside this list, and other GM or Jeep models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shock uses 180 degree directional mounting, check its orientation against the vehicle’s mounting points before fitting it. Gas charged shocks are pressurized, so do not attempt to open, puncture or heat the unit.
What’s included
Each unit is one M95 monotube shock absorber.
Not included: a second shock for the opposite corner of the axle, which must be obtained separately.









