Overview
The Skyjacker Softride Hydro Shock Absorber H7059 is a front hydraulic shock with a heavy-duty twin tube body, made for suspension lifts from 5 to 9 in. Its collapsed length is 16.56 in, its extended length is 28.750 in and its shock stroke is 12.19 in, which gives it long travel across that lift range.
The Softride Hydro design uses multi-stage velocity sensitive valving, an internal rebound bumper and an oversize piston head to control the suspension through its travel. The 5/8 inch hardened double chrome rod, polyurethane bushings and red boot are part of the same package.
Key features
- Multi-stage velocity sensitive valving
- Hydraulic action with variable resistance
- Heavy-duty twin tube construction
- 5/8 inch diameter hardened double chrome rod
- Internal rebound bumper and oversize piston head
- Expanded fluid reservoir to limit foaming and keep performance steady
- Heavy-duty high mileage white paint with minimum 240-salt protection
Long travel and suspension geometry
A long-travel front shock uses its full extension when the suspension droops over a bump or drops into a rut. Extended length sets how far the shock can reach, so it needs to match the droop that a lift allows. If the travel is too short, the shock can run out of extension and load the mounts.
The velocity sensitive valving keeps damping firm over small bumps and more controlled over larger ones. Keep the steering and brake lines clear of the body as the suspension moves, and check the boot for dust intrusion after mud and water crossings.
- Inspect the rod for scoring or pitting
- Check the bushings for splits after hard trail use
- Confirm clearance at full droop and full compression
- Replace bump stops that have flattened
Specifications
| Brand | Skyjacker |
|---|---|
| Series | Hydro Series |
| Part number | H7059 |
| UPC | 803696140056 |
| Position | Front |
| Lift range | 5 to 9 in |
| Damping | Hydraulic |
| Body | Heavy-duty twin tube |
| Piston rod | 5/8 inch diameter, hardened double chrome |
| Collapsed length | 16.56 in |
| Extended length | 28.750 in |
| Shock stroke | 12.19 in |
| Bushings | Polyurethane, red |
| Boot | Red |
| Finish | Heavy-duty high mileage white paint, minimum 240-salt protection |
Vehicle fitment
It fits 1970–1976 Ford F-100, 1977–1979 Ford F-150 and F-250, a 1979 Ford F-350, 1978–1979 Ford Bronco and 1987–1995 Jeep Wrangler (YJ) models in several trims. Match your year, model and trim before ordering.
The list does not include Ford F-150 trucks from 1980 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed lift range is 5 to 9 in, and the 28.750 in extended length should be compared with your installed suspension before installation. Confirm the front mounting position, and support the vehicle on jack stands when working on the front end.
What’s included
One front shock absorber with a red boot and polyurethane bushings.
Not included: the suspension lift kit needed to reach the 5 to 9 in lift range.








