Overview
The Skyjacker YJ40RSB is a 4 inch Sportride rear leaf spring for the 1987–1995 Jeep Wrangler (YJ). It is a single spring for the rear axle and fits with a lift height range of 0 to 4.99 inches.
Skyjacker builds the leaves from American steel, with each one shot peened by hard steel pellets at very high velocities. Peening compresses the steel and raises its tensile strength. Skyjacker presents this as the reason the spring can deliver its wheel travel and ride quality without shortening its life.
The bolt-style clips avoid the bind and friction of cinch-style clips, which bend tightly over the leaves. The leaves taper across their full width, so the ends flex more and the load spreads over a broader area.
Key features
- Rear position, single spring, 4 inch lift
- American steel leaves, shot peened for tensile strength
- Bolt-style clips designed to avoid binding and friction
- Tapered leaves for more flex at the ends
- Lift height range of 0 to 4.99 inches
- Bushings not included
Before you buy
A rear leaf spring carries the weight of the rear axle and sets the rear ride height, so it shapes how the vehicle handles on pavement and on the trail. Leaf packs flex as the axle moves over uneven ground, and the way the leaves load and unload affects both comfort and control. Replacing one spring changes rear height, so the rest of the rear suspension should be inspected as a set.
Before buying, check the vehicle’s current lift, tire size and the load the rear carries. A spring that does not match the rest of the setup can leave one side sitting differently from the other. Bushings, shackles and U-bolts are often replaced at the same time, because worn parts can shift a new spring out of position.
- Inspect leaf clips and bolts for wear at each service
- Check for cracked or broken leaves
- Re-check U-bolt torque after the first few trail runs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | YJ40RSB |
| UPC | 803696212760 |
| Product line | Sportride |
| Position | Rear |
| Spring quantity | Single spring |
| Lift | 4 inch |
| Lift height range | 0 to 4.99 inches |
| Material | American steel, shot peened leaves |
| Clip style | Bolt style |
| Bushings | Not included |
| Bushing kit | Needed separately |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1987–1995 Jeep Wrangler (YJ), covering every YJ trim from Base to Sport.
Its known fit is the 1987–1995 Jeep Wrangler (YJ) only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A separate bushing kit is needed because bushings are not included. Rear springs carry the rear axle, so block the frame and support the axle before removing the original spring. After a 4 inch lift, have the rear driveline angles checked and the vehicle aligned.
What’s included
One rear leaf spring, supplied as a single unit.
Not included: Bushing kit, which must be obtained separately.





