Overview
The Skyjacker YJ20RS is a Softride rear leaf spring for the 1987–1995 Jeep Wrangler (YJ). It is sold as a single spring and is designed for use with 2-2.5 inch lifted springs. The spring is made from American steel, and each leaf is shotpeened to raise its tensile strength. It replaces the rear leaf spring on the YJ it fits.
The Softride design aims for maximum wheel travel and good ride quality. Shotpeening compresses the steel surface, which increases tensile strength in each leaf, so the design can pursue wheel travel and ride quality without giving up spring life.
Key features
- Rear leaf spring for the 1987–1995 Jeep Wrangler (YJ)
- American steel construction
- Shotpeened leaves, with hard steel pellets fired at high velocity
- Softride design aimed at maximum wheel travel and ride quality
- Single spring per part, with a stated lift height range of 0 to 4.99 inches
Lift and leaf spring basics
A rear leaf spring locates the axle and carries the rear weight, so changing it changes ride height, axle position and how the rear of the Wrangler moves over bumps. The spring pack is the main part of the system, while the shackles, spring eyes and bushings keep the axle in place and absorb small movements.
After a rear spring change, the driveline angles and brake line length deserve a look because the axle sits at a different height. Shock absorbers may need to be checked as well, since their mounting length and travel are tied to the new ride height. Bump stops should also be inspected so the axle does not hit the frame at full compression.
Older leaf springs often show sag, cracked leaves or worn spring eyes. Replacing the spring when those signs appear keeps the axle in line and reduces driveline vibration.
- Check the driveline angle after the lift is set
- Inspect shackles and spring eye bushings for wear
- Match shock length to the new ride height
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | YJ20RS |
| UPC | 803696167497 |
| Position | Rear |
| Spring quantity | Single spring |
| Lift height range | 0 to 4.99 inches |
| Lift compatibility | Use with 2-2.5 inch lifted springs |
| Material | American steel |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims, and it is a direct fit for those vehicles.
This spring is for the YJ generation, so later Wrangler generations such as the TJ (1997–2006) and JK (2007–2018) are outside its fitment. Make sure your year, model and trim match the fitment before you order.
Installation notes
The bushing information conflicts, so confirm what is in the box before fitting, and have bushings on hand if they are needed. A rear spring change affects ride height, so check the alignment and driveline angles after the lift is set. Support the vehicle securely on jack stands before working under it.
What’s included
One Softride rear leaf spring, sold individually.
Not included: Spring bushings may need to be sourced separately; check the package contents before fitting.






