Select your vehicle

Skyjacker 8 Inch Lift Softride Coil Springs

Skyjacker

Shop Skyjacker Leaf Springs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Skyjacker TJ80F Softride coil springs for the front with an 8 in. lift
  • Set of 2, preset and formed from 5160H chromium alloy
  • Requires lift kit suspension component PN TJ68-DX or PN TJ80
  • Confirm fit for your vehicle’s year, model and trim

Description

Overview

The Skyjacker TJ80F is a pair of Softride coil springs for the front, giving an 8 in. lift when used with the required lift kit component. The springs are preset and formed from 5160H chromium alloy and powder coated to resist corrosion.

They require either PN TJ68-DX or PN TJ80 as the lift kit suspension component, so confirm that part before installing.

Key features

  • 8 in. lift for the front
  • Set of 2 Softride coil springs
  • 5160H chromium alloy, preset and formed
  • Powder coated to resist corrosion
  • Coils available separately
  • Limited lifetime warranty

Front lift setup

An 8 in. front lift changes the geometry of the control arms, steering links and driveline at the front axle. Each of those parts works at a new angle, so check the joints and bushings for play before the lift is driven any distance. A worn steering component can become noticeable once the front end is raised.

Because the springs depend on a matched lift kit component, the order of the install matters. Set up the lift component first, then fit the springs, then align the front end. Keep notes of the final measurements so future service can return the truck to the same setup.

  • Inspect steering and tie rod ends before lifting
  • Install the lift component before the springs
  • Check brake lines and CV angles
  • Schedule a front alignment once the install is complete

Specifications

Brand Skyjacker
Part number TJ80F
UPC 803696163895
Lift height 8 in.
Position Front
Quantity Set of 2
Material 5160H chromium alloy
Finish Powder coated
Warranty Limited lifetime
Required lift kit component PN TJ68-DX or PN TJ80

Vehicle fitment

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the springs depend on the listed lift kit component (PN TJ68-DX or PN TJ80), confirm that part is in place first. An 8 in. lift changes front suspension geometry, so schedule a front alignment after installation.

What’s included

Set of 2 front coil springs.

Not included: The lift kit suspension component, PN TJ68-DX or PN TJ80, is required and is not included.

SKU: SKYTJ80F Category:

Specification

Shipping weight 47.00 lbs
Package dimensions 22.00 × 12.00 × 6.00 in
brands

Questions & Answers

Is the Skyjacker TJ80F a front coil spring?

Yes. The TJ80F is a Softride coil spring positioned at the front and sold as a set of 2. It is an 8 in. lift spring.

Which lift kit component does the TJ80F require?

It requires PN TJ68-DX or PN TJ80 as the lift kit suspension component. Those parts are not included with the springs, so confirm one is available before installation.

Does the TJ80F fit my Jeep?

Confirm fit for your Jeep's year, model and trim before ordering these springs, and make sure the required lift kit component matches your setup.

What should I check after a front lift?

Start with an alignment, then check the steering and brake lines for stretch and look at the driveline angles on the front axle. Inspect the shocks and the lower control arm bushings, since a higher front end loads them differently. Retighten the fasteners after the first few drives.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Skyjacker Leaf Springs on Amazon