Overview
The Skyjacker DR40S is a rear Softride leaf spring for the Dodge and Plymouth vehicles listed below, covering 1972 to 1993 model years. Each spring is a single unit, so two are needed for a pair. The rubber bushings come pre-installed on the spring.
The spring is built from progressive multileaf packs, and its load capacity is equal to or greater than the original equipment spring. The lift height range for this part is 0 to 4.99 inches.
Key features
- Rear-position single leaf spring for Dodge and Plymouth models
- Progressive multileaf pack construction
- Load capacity equal to or greater than OE
- Rubber bushings pre-installed
- American steel construction
- Lift height range of 0 to 4.99 inches
Support during rear spring removal
A rear leaf spring carries the weight of the rear axle, so the axle has to be held in place before the old spring comes off. Once the shackle and U-bolts are loosened, the axle can drop quickly, which is why stands and wheel chocks are part of the job. Work slowly and keep hands and tools clear of the spring eye while the load shifts.
Multileaf springs can also trap road salt and moisture between the leaves, so inspect the old unit for rust and broken leaves before you reuse any hardware. Clean the mounting surfaces and check the frame hangers, since a fresh spring is only as secure as the parts it bolts to.
- Chock the front wheels before lifting the rear
- Use rated stands under the axle
- Replace worn shackle bolts and nuts
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | DR40S |
| UPC | 803696127569 |
| Product line | Softride leaf spring |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings | Rubber, pre-installed |
| Lift height range | 0 to 4.99 inches |
| Material | American steel |
| Construction | Progressive multileaf packs |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
The DR40S fits the 1974–1993 Dodge Ramcharger in Base, Canyon Sport, Royal SE and SE trim, the 1972–1977 and 1986–1989 Dodge W100 in Custom and Pickup Base trim, the 1977–1993 Dodge W150 in Base and S trim, the 1972–1980 Dodge W200 in Base and Pickup Base trim, the 1981–1993 Dodge W250 in Base trim, and the 1974–1981 Plymouth Trailduster in Base trim.
Dodge Ram 1500 and Ram 2500 pickups from 1994 to 2001 are not on this list; those use the DR56S. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rubber bushings are already fitted, so no separate bushing part is needed for this rear spring. Support the rear axle securely while the old spring is removed, since the spring carries the axle’s weight.
What’s included
One rear Softride leaf spring with pre-installed rubber bushings. Two springs are needed for a pair.




