Overview
The Skyjacker D600CS is a front Softride leaf spring for the 1987 to 1993 Dodge W250 and W350 Base. It is a single progressive multileaf spring rated for a 5 to 6.99 inch lift, and no bushings are included; Skyjacker recommends SKYSE21D.
The spring is made from American steel, carries a Limited Lifetime Warranty, and has a load capacity at least equal to the factory equivalent.
Key features
- Front position, single spring
- Progressive multileaf pack design
- Lift height range 5 to 6.99 inches
- Bushings not included
- Recommended bushing SKYSE21D
Lift and steering geometry
Front springs set the height of the front axle, and that height determines caster and camber as well as steering feel. A spring that lifts the front end changes these angles, so steering and wheel alignment should be checked after the swap rather than assumed to be correct. The bump stops and track bar are the parts most often checked alongside a lift, because a higher front end can change how they operate.
On a heavier-duty W-series truck, a mismatch between spring rate and the rest of the front end often shows up first as wander or a loose feel at highway speed. Check for play in the steering linkage and ball joints. Replacing worn ones while the front is apart keeps the new spring working as intended.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | D600CS |
| UPC | 803696126722 |
| Product line | Softride leaf spring |
| Position | Front |
| Spring quantity | Single spring |
| Bushings included | Not included |
| Recommended bushing | SKYSE21D |
| Lift height range | 5 to 6.99 inches |
| Fitment | Direct fit |
| Material | American steel |
| Warranty | Limited lifetime |
Vehicle fitment
It is a direct fit for 1987 to 1993 Dodge W250 and W350 Base models.
Ramcharger and W100 to W200 trucks are not on this list, and 1986 and earlier Dodge W250 and W350 models are outside the listed years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushings are not included, so a separate bushing set matching SKYSE21D is needed. Front spring work changes steering geometry, so plan a wheel alignment after the swap. Keep the front axle on rated stands while the old spring is removed.
What’s included
One front leaf spring.
Not included: bushings and a second spring.





