Overview
The Skyjacker FR56S is a rear Softride leaf spring for older Ford trucks, including F-100, F-150, F-250 and F-350 models from 1973 through 1998, plus the 1978-1996 Bronco. Its progressive multileaf packs come with rubber bushings already fitted.
The load capacity matches or exceeds original equipment, and the spring is made from American steel. It carries a limited lifetime warranty. The lift height range is 5 to 6.99 inches, and each unit is a single spring.
Key features
- Progressive multileaf pack construction
- Rubber bushings pre-installed
- Load capacity equal to or greater than original equipment, per the brand
- American steel
- Limited lifetime warranty
- Lift height range 5 to 6.99 inches
Setting rear ride height
Rear ride height depends on the spring, the shocks and the load the truck normally carries. A stiffer rear spring raises the back of the truck and changes how the rear axle sits under the frame, which affects driveline angles and the position of the shock mounts. Measure the height on both sides before and after the swap so any difference is caught early.
Replacing both rear springs together keeps the truck level side to side and makes handling more predictable. Check the shackles, hangers and bump stops at the same time, since a new spring working with worn parts can produce clunks and uneven wear. Use stands rather than a jack alone whenever the axle is raised.
- Replace both rear springs together
- Measure ride height on each side
- Inspect shackles, hangers and bump stops
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | FR56S |
| UPC | 803696133621 |
| Product type | Softride leaf spring |
| Position | Rear |
| Spring quantity | Single spring (two for a pair) |
| Bushings | Rubber, pre-installed |
| Lift height range | 5 to 6.99 inches |
| Material | American steel |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
Skyjacker lists six vehicle entries: 1978-1996 Ford Bronco, 1973-1976 Ford F-100, 1977-1996 Ford F-150, 1977-1998 Ford F-250, 1997 Ford F-250 HD (XL, XLT) and 1979-1997 Ford F-350, each with its trim list.
Model years outside these ranges are not covered by the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace both rear springs together so the truck sits level side to side. Use stands, not the jack alone, whenever the rear axle is raised. Confirm the 5 to 6.99 inch range suits your planned lift before mounting.
What’s included
One Skyjacker FR56S rear Softride single leaf spring with pre-installed rubber bushings.
Not included: the second spring for a pair, which the brand says to order as two.




