Overview
The Skyjacker J40RSB is a rear Softride leaf spring, sold as a single spring, for Jeep CJ5, CJ7 and Scrambler applications. It fits the 1976 to 1983 Jeep CJ5, the 1976 to 1986 Jeep CJ7 and the 1981 to 1985 Jeep Scrambler, with a lift height range of 0 to 4.99 inches.
The leaves are tapered across the full width, which creates more flex at the leaf ends and spreads load over a larger area. This shape helps keep one leaf from digging into the leaf above it. Bolt-style clips replace cinch-style bend clips, which can bind and add friction. Each leaf is shot-peened from American steel for added tensile strength.
Key features
- Rear position Softride leaf spring, sold as a single spring
- Tapered leaves that flex at the leaf ends
- Bolt-style spring clips that reduce binding and friction
- American steel leaves, each shot-peened
- Recommended bushing part number SKYSE45J, sold separately
Rear bushing and clip care
Rear leaf springs carry the axle and set rear height, so the bushings at each eye and the clips on the pack deserve regular attention. Bushings wear, harden and crack over time, and a worn bushing lets the spring move in ways it was not designed for. Replacing bushings during a spring swap is a sensible step because the old ones are already out of the way.
Clips hold the leaves in line and control how they slide against one another. Check the clip fasteners for looseness, and look for fretting or polished spots on the leaves where they rub. Keeping the leaves aligned helps the spring deliver steady height and reduces noise on rough roads.
Support the axle properly before removing the old spring, and keep hands clear of the pinch points around the eye and hanger. When reinstalling, snug the hardware and recheck it after the first few drives, since new bushings typically settle a little.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | J40RSB |
| UPC | 803696212708 |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings included | Bushings not included |
| Recommended bushing part number | SKYSE45J |
| Lift height range | 0 to 4.99 inches |
| Spring clip style | Bolt style |
| Material | American steel, shot-peened leaves |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1976 to 1983 Jeep CJ5 in Base, Golden Eagle, Laredo, Limited and Renegade trims, the 1976 to 1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1981 to 1985 Jeep Scrambler in Base, Laredo, Renegade, SL and SR trims.
The list does not include the 1959–1975 Jeep CJ5 or any Jeep CJ6 applications. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The recommended bushing, part number SKYSE45J, is sold separately, so have it ready before the rear spring is mounted.
Support the rear axle and the vehicle on stands before removing the old spring.
What’s included
A single rear spring is included.
Not included: Bushings. The recommended bushing is part number SKYSE45J and is sold separately.





