Overview
The Skyjacker Softride CR14S is a rear leaf spring with pre-installed rubber bushings, constructed as a progressive multileaf pack for a lift height range of 0 to 4.99 inches.
The CR14S is a single spring, so a pair takes two. Its progressive multileaf pack has a load capacity equal to or greater than OE and is made from American steel.
Key features
- Progressive multileaf pack construction
- Load capacity equal to or greater than OE
- Made with American steel
- Rubber bushings pre-installed
- Rear position
- Limited lifetime warranty
Rear leaf spring service
Rear leaf springs carry the rear axle’s load and control its position front to back. They are usually fastened with U-bolts and sit in a perch on the axle, and the spring’s ends attach to the frame with eyes and shackles. Over time the bushings in those eyes compress and crack, letting the axle shift and creating knocks over bumps.
When fitting a new rear spring, clean the perch and check the U-bolts for stretch or corrosion before reusing them. Replacing bushings and shackles at the same time keeps the new spring from being set against worn parts. Check the axle’s pinion angle after a rear spring change, since the axle can rotate as the spring is loaded, and look for brake line or shock clearance once the vehicle is back at ride height.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | CR14S |
| UPC | 803696121390 |
| Product type | Leaf spring |
| Series | Softride |
| Position | Rear |
| Spring quantity | Single spring (two needed for a pair) |
| Bushings | Rubber, pre-installed |
| Lift height range | 0 to 4.99 inches |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
The CR14S is a direct-fit rear leaf spring for a 0 to 4.99-inch lift height range. Confirm the year, make and model against your rear suspension before ordering.
Compare the spring’s length and rate with your current spring before ordering.
Installation notes
Suspension parts affect steering, braking and handling, so professional installation is a good choice. Use the specified hardware and torque every fastener to specification, then re-check after the first miles of driving. Have the alignment checked after suspension work, and confirm brake line, driveshaft and tire clearance. Changes in ride height can change headlight aim, so check it afterward.
What’s included
One rear Softride leaf spring with rubber bushings installed.
Not included: A second spring for the other side, U-bolts and other mounting hardware.






