Overview
The Skyjacker DR54S is a rear Softride leaf spring for a 0 to 4.99 inch lift range. It is sold as a single spring and comes with rubber bushings already fitted.
The spring is built from progressive multileaf construction in American steel, with load capacity equal to or greater than the original equipment spring.
Key features
- Progressive multileaf construction
- American steel
- Rubber bushings pre-installed
- Limited lifetime warranty from Skyjacker
Rear springs and bushing care
Rubber bushings sit at the spring eyes and shackles, and they absorb the small movements that come with every bump. They wear with heat, road grime and time, and a worn bushing can make the rear feel loose or cause clunking over rough surfaces. Check them when the spring is inspected and replace any that are cracked, torn or squashed.
A single rear leaf spring works best when the matching spring on the other side is in good shape. Compare heights side to side, look for a sagging corner, and check the U-bolts for looseness. Retighten hardware after the first few trail runs, and wash mud from the spring pack so grit does not work between the leaves.
- Check bushings for cracks and flattening
- Compare rear heights left to right
- Retighten U-bolts after early trail use
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | DR54S |
| UPC | 803696127583 |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings | Rubber bushings included |
| Lift height range | 0 to 4.99 in |
| Material | American steel |
| Warranty | Limited lifetime |
Vehicle fitment
The fitment is Direct Fit for a 0 to 4.99 inch lift range. Confirm the year, model and trim against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear leaf spring with pre-installed rubber bushings.







