Overview
The Skyjacker H7037 is a rear Softride Hydro shock absorber for the 2007-2018 Jeep Wrangler (JK), in two-door and four-door models. It is made for vehicles with a 2 to 3.5 inch suspension lift.
The hydraulic body is heavy-duty twin tube with a 5/8 inch hardened double chrome rod. Its collapsed length is 15.05 inches, its extended length is 25.35 inches and its stroke is 5.30 inches, so compare these figures against your current rear shock before buying.
Key features
- Rear mounting location for JK Wranglers
- Multi-stage velocity sensitive valving
- Heavy-duty twin tube construction
- 5/8 inch hardened double chrome rod
- Red polyurethane bushings and red boot
- Designed for two-door and four-door bodies
Rear shock basics
A rear shock on a Wrangler JK controls how the axle moves on uneven ground and keeps the rear tires in contact when the trail gets rough. The shock’s travel and mounting position matter as much as its damping. A shock that is too short for the lift can bottom out, while one that is too long can strain the mounts.
Look at the old shock before ordering. Check the mount bushings, look for oil on the body and feel for a rough rod. On a lifted JK, the bump stops and track bar bushings should also be inspected, since they take load when the shock reaches the end of its travel.
- Check mounts and bushings for wear
- Look for oil on the body
- Inspect bump stops after a lift
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7037 |
| UPC | 80369613653 |
| Shock series | Hydro Series, hydraulic |
| Mounting location | Rear |
| Lift range | 2 to 3.5 in. lift |
| Collapsed length | 15.05 in. |
| Extended length | 25.35 in. |
| Shock stroke | 5.30 in. |
| Piston rod | 5/8 in. diameter, hardened double chrome |
| Body | Heavy-duty twin tube |
| Sold as | Each |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK) in trims including Sport, Sport S, Sahara, Rubicon, X and the 70th and 75th Anniversary editions, in two-door and four-door form. Each unit is for the rear position.
Wrangler TJ, LJ and 2018-and-later JL models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use this rear shock only on a JK with a 2 to 3.5 inch lift. Check that the 5.30 inch stroke and the collapsed and extended lengths match the shock being replaced before installing.
What’s included
One rear shock absorber with red polyurethane bushings and a red boot. Not included: the lift kit and the second rear shock for a pair.









