Overview
The Skyjacker M9579 is a rear M95 Performance monotube shock absorber for light trucks, Jeeps and SUVs. Skyjacker builds the M95 line as a gas-charged monotube meant to keep operating temperatures lower in hard use.
The shock has a 46mm bore and a floating piston, and the brand lists its lift range as 6 to 9 in. Use that range to judge whether the shock suits your suspension height.
Key features
- Rear position
- Gas-charged monotube construction
- 46mm bore for the M95 body
- Internal bump stop built into the shock
- 180 degrees directional mounting
- Designed for lifts of 6 to 9 in.
Setting up a rear monotube shock
A monotube design keeps the damping oil and gas in one tube, so heat moves out through the body rather than building up in a separate reservoir. That layout suits trucks that work hard on long grades or sustained washboard, where a shock that runs cooler holds its damping more steadily. Gas charging helps suppress foam in the oil under those conditions.
Directional mounting matters on this style of shock. Confirm the eye orientation against the vehicle before tightening anything, because a reversed shock can bind at full travel and wear its bushings quickly. Internal bump stops cushion the end of travel, so a shock that bottoms often may point to worn springs or a lift that has settled.
- Check mount bushings for cracks or looseness at each service
- Look for oil seepage around the shaft seal
- Watch for clunks at full compression, which can signal internal wear
- Inspect the bump stop area when the suspension is compressed
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9579 |
| UPC | 803696211619 |
| Shock series | M95 Performance |
| Shock type | Monotube, gas charged |
| Position | Rear |
| Bore size | 46mm |
| Mounting | Directional, 180 degrees |
| Lift height | 6 to 9 in. |
| Fitment | Direct fit |
| Sold as | Each |
Vehicle fitment
No specific vehicles are named for this rear shock. Verify the year, model and trim against your vehicle before ordering, and compare the 6 to 9 in. lift range with your suspension height.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting is directional at 180 degrees, so check orientation before the shock goes on. The bump stop is internal to the shock.
What’s included
One rear Skyjacker M9579 shock absorber, sold as each.
Not included: Review the parts list against your installation needs before starting, including any brackets or hardware your mounting requires.








