Overview
The Skyjacker H7035 is a front Softride Hydro shock absorber for 2007–2018 Jeep Wrangler (JK) models, including Unlimited versions. It is a direct fit for a 1 – 3.5 in. lift and is sold individually.
It has heavy-duty twin tube construction, multi-stage velocity sensitive valving, an internal rebound bumper, an oversize piston head, polyurethane bushings, variable resistance and an expanded fluid reservoir. The reservoir and piston are designed to keep damping steady with less foaming. The 5/8 inch rod is hardened and double chrome.
Key features
- Heavy-duty twin tube construction
- Multi-stage velocity sensitive valving
- Internal rebound bumper
- Oversize piston head
- Expanded fluid reservoir to reduce foaming
- Variable resistance and tough polyurethane bushings
Care and inspection
Front shocks do most of their work on the hardest bumps, so the rubber and metal parts wear faster than many owners expect. Check the red boot for splits and look at the bushings for cracks or flattening. Oil on the shock body usually means the seal is letting fluid past, and that shock should be replaced rather than wiped clean.
A shock with an expanded fluid reservoir and an internal rebound bumper is still a wear part. Tighten the mounting hardware after the first few drives on a new unit, and recheck it at each oil change. If the Wrangler starts to bounce or wander after a dip, inspect both front units before blaming the tires or alignment.
- Match the collapsed and extended lengths to the shock being replaced
- Keep the boot clean and free of grit
- Replace both fronts together for matched damping
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7035 |
| UPC | 803696190761 |
| Series | Hydro Series |
| Mounting location | Front, 2 and 4-door models |
| Damping | Hydraulic |
| Collapsed length | 13.54 in. |
| Extended length | 22.75 in. |
| Shock stroke | 11.125 in. |
| Rod | 5/8 in. diameter, hardened, double chrome |
| Lift height | w/1 – 3.5 in. Lift |
| Fitment type | Direct fit |
| Sold as | Each |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler (JK) models in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in both standard and Unlimited versions.
Wrangler TJ and JL models and other Jeep models fall outside this fitment. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Shocks are sold individually, so a front axle needs two units. Check the collapsed and extended lengths against your current shock before installing the replacement.
What’s included
Each unit is one front shock. No other hardware is listed with it.









