Overview
The Skyjacker M9565 is a front gas monotube shock absorber for the 2007–2018 Jeep Wrangler (JK), covering two-door and four-door models with a 4 – 5 in. lift. It is part of the M95 Performance series, with a 46mm bore and an internal bump stop.
The single tube design keeps operating temperatures cooler under extreme conditions. High pressure nitrogen gas and a floating piston work together in the body, and the 180 degree directional mounting sets the shock’s orientation during installation.
Key features
- Gas monotube design
- High pressure nitrogen gas and floating piston
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
- Front position, direct fit
Front shock wear and alignment
Front shocks on a Wrangler work alongside the coil springs, control arms and steering linkage, so they affect both ride comfort and steering feel at speed. Off-road, a front shock absorbs repeated impacts from rocks and ruts, and wear shows up as front-end bounce or pitching under braking.
When a lift is involved, shock length and mounting geometry have to match the lift height, and changing either can alter the shock’s travel. Replace front shocks in pairs so both sides damp evenly. After the first few trail runs, re-check the upper and lower mounting bolts and look for oil on the body or damage to the bump stop.
- Check the lift setting against the shock length
- Inspect for oil seepage and dented tubes
- Re-torque mounting bolts after initial use
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9565 |
| UPC | 803696211534 |
| Series | M95 Performance (M95 Series) |
| Position | Front |
| Construction | Monotube |
| Gas charge | High pressure nitrogen |
| Piston | Floating |
| Bore | 46mm |
| Bump stop | Internal |
| Mounting | 180 degrees directional |
| Lift height | 4 – 5 in. |
| Body style | 2 and 4-door models |
| Quantity | Each |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, plus Unlimited 70th and 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X, and X.
Wrangler JL (2018 and later), TJ, LJ and YJ models, and rear positions, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 4 – 5 in. lift setting matches your Wrangler before installing. After fitting, check clearance at full suspension travel.
What’s included
One front gas monotube shock absorber, quantity each.
Not included: Check brackets and mounting hardware against your installation before starting.









