Overview
The Skyjacker H7016 is a Softride Hydro front shock absorber for 1 to 3 inches of suspension lift on the Jeep Cherokee (XJ), Comanche, Grand Cherokee (WJ and ZJ) and Wrangler (LJ and TJ).
A shock absorber controls spring movement and ride quality. Skyjacker’s Softride Hydro series uses hydraulic action with multi-stage velocity sensitive valving, and the H7016 is the front shock for 1–3 inches of suspension lift.
This shock is a common choice for most of the kits in the line. It gives a comfortable street ride and is firm enough for most off-road use. It is sold as a single unit, not a pair.
Key features
- Hydraulic action with multi-stage velocity sensitive valving
- 5/8 inch diameter hardened double chrome rod
- Heavy-duty twin tube construction
- Internal rebound bumper and oversize piston head
- Polyurethane bushings
- Expanded fluid reservoir to help maintain consistent performance with less foaming
- Front mounting location for 0–3 inches of lift
Choosing shock damping
Front shocks do more than cushion bumps. They control how quickly the springs rebound after a dip or a rock, which keeps the tires on the ground and the steering settled. When a vehicle is lifted, the shock works at a different angle and over a longer travel range, so its damping matters more than it did at stock height.
Twin tube hydraulic designs are common on lifted trucks because they manage heat better on long grades. Damping that is too soft lets the front end wallow on pavement, while damping that is too firm can feel harsh and pass trail impacts into the frame. Pairing shock valving with your tire size and spring rate keeps the setup balanced.
Keep the shock mounting hardware clean and free of corrosion so the bushings seat properly. A shock that is bent at the eye or binding at full compression will wear quickly, so check clearance through the full range of travel.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7016 |
| UPC | 803696134826 |
| Product type | Shock absorber |
| Series | Softride Hydro |
| Position | Front |
| Lift height | 1-3 inch |
| Type | Hydraulic, twin tube |
| Rod | 5/8 inch diameter, hardened double chrome |
| Collapsed length | 13.54 in |
| Extended length | 22.75 in |
| Shock stroke | 9.20 in |
| Quantity | Single shock |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Skyjacker H7016 shock covers these Jeep vehicles, with the trim levels shown:
- 1984–2001 Jeep Cherokee (XJ) (Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport)
- 1986–1992 Jeep Comanche (Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS)
- 1999–2004 Jeep Grand Cherokee (WJ) (Laredo, Limited, Overland, Special Edition, Sport)
- 1993–1998 Jeep Grand Cherokee (ZJ) (5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi)
- 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon)
- 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
The list does not include the Jeep Wrangler YJ, JK or JL, or the Cherokee outside 1984–2001. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Support the vehicle by the frame on jack stands before removing the old shock.
- Tighten the shock mounting bolts to the correct torque and re-check them after the first drive.
- Make sure the H7016 does not bottom out or bind at full suspension travel.
- The H7016 is a single shock, so plan to install shocks in pairs for each axle as the manufacturer directs.
What’s included
- One front shock absorber












